Home > Brinkmann Grill Models > Brinkmann 810-9210-SBrinkmann 2 Burner Gas Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Brinkmann grill.
Part diagrams and owners manuals for Brinkmann model: 810-9210-S
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for the Brinkmann 810-9210-S
810-9210-S Burners
Stainless steel burner for Brinkmann model 810-9210-S.
Replaces Brinkmann factory part# 154-9210-0
Part Number: 19411
Dimensions: 14 1/2 x 1
Material: stainless steel
Weight: 0.7
$31.72
Adjustable universal front-to-back tube burner with top-ported flame holes. This burner may not work with existing ignition electrodes and back burner cross-overs.
- Variable length burner adjusts from 13 1/2 to 17 1/2.
- Includes extra hardware and mounting brackets to accommodate almost all grills.
- Comes with complete installation instructions and diagrams.
WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for Ordered Wrong Part. You will be responsible for all shipping fees.
Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7
$19.99
810-9210-S Burner Brackets and Carryovers
Stainless steel burner cross-over tube for Brinkmann model 810-9210-S.
Replaces Brinkmann factory part# 600-9210-8
Part Number: 09421
Dimensions: 9 1/16 x 2 5/16
Material: stainless steel
Weight: 0.2
$12.21
810-9210-S Cooking Grids
Stamped porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Replaces Brinkmann factory part# 115-9210-0
Part Number: 59411
Dimension Front-to-Back: 15 3/8
Dimension Side-to-Side: 9 1/4
Material: stamped porcelain steel
Weight: 1.6
$33.89
810-9210-S Heat Distribution Plates
Porcelain steel Heat Distribution Plate. Sold individually.
Replaces Brinkmann factory part# 600-9210-7
Part Number: 99411
Dimension Front-to-Back: 14 1/4
Dimension Side-to-Side: 4
Material: porcelain steel
Weight: 0.7
$22.23 $15.99
SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0215-X3
Dimension Front-to-Back: 14 1/4
Dimension Side-to-Side: 4
Material: stainless steel
Weight: 1.8
$44.72
Stainless steel Heat Distribution Plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0215
Dimension Front-to-Back: 14 1/4
Dimension Side-to-Side: 4
Material: stainless steel
Weight: 0.6
$16.16
810-9210-S Igniter Components
Collector box, ceramic electrode, 7 wire with female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Brinkmann factory part# 600-9209-B
Part Number: 08410
Material: ceramic
Weight: 0.3
$13.92
810-9210-S Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Replaces Brinkmann factory part# 155-7600-0
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
810-9210-S Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
16 Stainless Steel Tong/Turner Combination. 16 multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick flat spit basket. Attaches to 3/8 rotisserie rod with adjustable lid to secure food. 16x7.5x2
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2 x 16
Weight: 1.5
$22.60
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60