Home > Broil King Grill Models > Broil King 9130-64NZ
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil King grill.
Replacement grill parts for Broil King model: 9130-64NZ
9130-64NZ Burners
Genuine OEM Broil King stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
Genuine OEM Broil King Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
9130-64NZ Cooking Grids
Genuine OEM Broil King cast iron
cooking grid 330/440/550 Grid measures 17.48 x 6 for Broil King model 9130-64NZ.17.
- Sold individually
- Number required varies, check your grill
- Porcelain treated, flat matte finish
Part Number: 52005-281
Dimension Front-to-Back: 17 7/16
Dimension Side-to-Side: 6 3/16
Material: cast iron
Weight: 5.5
$39.97
9130-64NZ FLAV-R-WAVE
Genuine OEM Broil King stainless steel Flav-R-Wave for Broil King model 9130-64NZ.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8
Dimension Side-to-Side: 6
Material: stainless steel
Weight: 1.14
$21.93
9130-64NZ Igniter Components
Genuine OEM Broil King electronic push-button 4-spade igniter.
- Uses AAA battery (not included)
- Requires 3/4 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-247
Weight: 0.5
$18.48
Genuine OEM Broil King electrode with 14 3/8 connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
Genuine OEM Broil King 32 wire for side burner and other applications. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T18
Dimensions: 32
Weight: 0.05
$4.42
9130-64NZ Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2 x 6
Material: stainless steel
Weight: .35
$7.60
Genuine OEM Broil King Porcelain Grease Pan for Broil King model 9130-64NZ.
Part Number: 22009-901
Dimensions: 6 1/2 x 5 1/8
Weight: .45
$15.11
9130-64NZ Knobs and Handles
KNOB GAS VALVE SMALL for Broil King model 9130-64NZ.
Part Number: 50479-168
Weight: 0.1
$5.15
DOOR HANDLE RESIN * for Broil King model 9130-64NZ.
Part Number: 21475-138
Weight: 1.0
$6.73
9130-64NZ Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
9130-64NZ Wheels and Castors
Genuine OEM Broil King 7 cart wheel with 3/8 axel hole. Mini hub cap is # 00400251, sold separately.
Part Number: 10892-7G
Weight: .45
$13.19
CASTER BRACKET 440 BLK RESIN for Broil King model 9130-64NZ.
Part Number: 51339-401
Weight: 0.1
$2.83
Rubber castor, 3 w/plate, locking for Broil King model 9130-64NZ.
Part Number: 10892-23
Weight: 0.66
$6.87
9130-64NZ Heat indicators and Meat Thermometers
Genuine OEM Broil King Heat indicator. About 2 3/8 wide and 2 high. The threaded stem is about 5 /16 diameter and 1 1/8 long.
Part Number: 10571-6
Weight: 0.12
$17.76
9130-64NZ Miscellaneous Repair Parts
Hinge pin clip for Broil King model 9130-64NZ.
Part Number: S21233
Weight: 0.01
$1.08
Washer for Broil King model 9130-64NZ.
Part Number: S21255
Weight: 0.01
$1.08
9130-64NZ Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 9130-64NZ.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
9130-64NZ Side Burners
COVER SIDE BURNER BLACK for Broil King model 9130-64NZ.
Part Number: 23000-251
Dimensions: 14 1/4 x 11 3/16
Weight: 1.80
$10.97
SIDE BURNER GRID BLK 330/440/550. Grid for side burner. 9 diameter round and has two support prongs. Porcelain coated, glossy finish.
Note: Some owners manuals incorrectly list this part as 53139-98.
Part Number: 53140-981
Weight: .8
Image not available
$18.38
9130-64NZ Accessories
6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles
Part Number: 40538
Material: chrome steel
Weight: 1.1
$15.59
16 Stainless Steel Tong/Turner Combination. 16 multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4 x 12 3/4
Material: stainless steel
Weight: 1.6
$22.70
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59