Home > Broil King Grill Models > Broil King 9343-22
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil King grill.
Replacement grill parts to fit Broil King model: 9343-22
9343-22 Burners
Genuine OEM Broil King stainless steel burner and venturi assembly. Includes burner-mounted igniter electrode and wire part# S15500. Fully assembled.
Part Number: S10077
Dimensions: 8” x 16”
Material: Stainless steel
Weight: 2.5
$59.56
Genuine OEM Broil King Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
9343-22 Cooking Grids
Genuine OEM Broil King cast iron
cooking grid SOLD INDIVIDUALLY.
- Sold individually
- Number required varies, check your grill
- Porcelain treated, flat matte finish
Part Number: 10225-T356
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 10 3/4”
Material: Cast iron
Weight: 6.1
$55.45
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Part Number: 63262
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: matte cast iron
Weight: 15.1
$105.10
9343-22 FLAV-R-WAVE
Genuine OEM Broil King stainless steel Flav-R-Wave SS
heat plate for Broil King model 9343-22.
Part Number: 10222-T325
Dimension Front-to-Back: 10 3/8”
Dimension Side-to-Side: 18”
Material: Stainless steel
Weight: 2.4
$37.41
9343-22 Igniter Components
Genuine OEM Broil King push button igniter. For two-wire grills with second wire for side burner. Wires not included.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-22
Weight: 0.2
$8.19
Genuine OEM Broil King collector box and electrode assembly. Includes
- burner mounted collector box (clip on)
- ceramic electrode and 18” wire with round connector and protective sleeve.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: S15500
Weight: 0.1
$5.45
Genuine OEM Broil King 21” wire for side burner or other applications. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T12
Dimensions: 21
Weight: 0.05
$4.21
9343-22 Grease Trays
Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.
Made in USA Part Number: S15111
Material: stainless steel
Weight: 0.02
$3.11
Mini grease bucket used with wire holder S15111 for Broil King model 9343-22.
Part Number: S15112
Weight: .03
$2.83
9343-22 Knobs and Handles
Black lid handle. Fits older GrillPro and other models which use a half-handle that is 10 3/4” long. Requires 8 3/4” mounting holes, center to center.
Part Number: 30230228
Weight: 0.45
$14.88
S/B LID HANDLE WAGON ENCLOSER* for Broil King model 9343-22.
Part Number: PB20-60
Weight: 1.0
$1.95
9343-22 Regulators and Hoses
HOSE SIDE BURNER W/.066 ORIFICE. This part is no longer available, per the manufacturer for safety reasons. Must purchase entire valve and manifold assembly. You can contact the manufacturer directly or email us for more information.
Part Number: S13467-066
Weight: 1.0
Image not available
$
9343-22 Wheels and Castors
Genuine OEM Broil King 7” cart wheel with 3/8” axel hole. Mini hub cap is # 00400251, sold separately.
Part Number: 10892-7G
Weight: .45
$13.19
Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included for Broil King model 9343-22.
Part Number: 10240-13
Weight: .10
$2.23
9343-22 Warming Racks
Genuine OEM Broil King warming rack.
- Front-to-back of rack itself: 11 7/8”
- Side-to-side of rack itself: 21 5/8”
- Length of rear mounting rod: 24 1/2”
- Length of front swing-away rod: 23 5/8”
Part Number: 38110172
Dimensions: 24 1/2
Weight: 3.8
$26.75
9343-22 Heat indicators and Meat Thermometers
Genuine OEM Broil King Heat indicator. About 1 7/8” wide and 1 7/16” high. The threaded stem is about 5/16” diameter and 1 1/8” long.
Part Number: 10571-5
Dimensions: 1 7/8” x 1 7/16”
Weight: 0.1
$15.11
9343-22 Miscellaneous Repair Parts
Hinge pin clip for Broil King model 9343-22.
Part Number: S21233
Weight: 0.01
$1.08
Cotter pin for Broil King model 9343-22.
Part Number: Y-11230
Weight: 0.01
$1.08
Leg plug extension for Broil King model 9343-22.
Part Number: Y-12665
Weight: 0.1
$5.03
Washer for Broil King model 9343-22.
Part Number: S21255
Weight: 0.01
$1.08
9343-22 Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 9343-22.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
9343-22 Accessories
10” Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57