Home > Broil King Grill Models > Broil King 9343-24NZ
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil King grill.
Replacement gas grill parts for Broil King model: 9343-24NZ
9343-24NZ Burners
Genuine OEM Broil King stainless steel burner and venturi assembly. Includes burner-mounted igniter electrode and wire part# S15500. Fully assembled.
Part Number: S10077
Dimensions: 8 x 16
Material: Stainless steel
Weight: 2.5
$59.56
Genuine OEM Broil King Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
9343-24NZ Cooking Grids
Genuine OEM Broil King
cooking grid SOLD INDIVIDUALLY.
- Sold individually
- Number required varies, check your grill
- Porcelain enameled steel, glossy finish
Part Number: 10225-T341
Dimension Front-to-Back: 14 7/8
Dimension Side-to-Side: 11
Material: Porcelain steel
Weight: 2.15
$21.20
9343-24NZ FLAV-R-WAVE
Genuine OEM Broil King stainless steel Flav-R-Wave SS
heat plate for Broil King model 9343-24NZ.
Part Number: 10222-T325
Dimension Front-to-Back: 10 3/8
Dimension Side-to-Side: 18
Material: Stainless steel
Weight: 2.4
$37.41
9343-24NZ Igniter Components
Genuine OEM Broil King push button igniter. For two-wire grills with second wire for side burner. Wires not included.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-22
Weight: 0.2
$8.19
Genuine OEM Broil King collector box and electrode assembly. Includes
- burner mounted collector box (clip on)
- ceramic electrode and 18 wire with round connector and protective sleeve.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: S15500
Weight: 0.1
$5.45
Genuine OEM Broil King 21 wire for side burner or other applications. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T12
Dimensions: 21
Weight: 0.05
$4.21
9343-24NZ Grease Trays
Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.
Made in USA Part Number: S15111
Material: stainless steel
Weight: 0.02
$3.11
9343-24NZ Knobs and Handles
Black lid handle. Fits older GrillPro and other models which use a half-handle that is 10 3/4 long. Requires 8 3/4 mounting holes, center to center.
Part Number: 30230228
Weight: 0.45
$14.88
S/B LID HANDLE WAGON ENCLOSER* for Broil King model 9343-24NZ.
Part Number: PB20-60
Weight: 1.0
$1.95
9343-24NZ Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
9343-24NZ Wheels and Castors
Genuine OEM Broil King 7 cart wheel with 3/8 axel hole. Mini hub cap is # 00400251, sold separately.
Part Number: 10892-7G
Weight: .45
$13.19
Wheel bolt 3.25 long; uses one hinge pin part number S21233 not included for Broil King model 9343-24NZ.
Part Number: 10240-13
Weight: .10
$2.23
9343-24NZ Warming Racks
Genuine OEM Broil King warming rack.
- Front-to-back of rack itself: 11 7/8
- Side-to-side of rack itself: 21 5/8
- Length of rear mounting rod: 24 1/2
- Length of front swing-away rod: 23 5/8
Part Number: 38110172
Dimensions: 24 1/2
Weight: 3.8
$26.75
9343-24NZ Heat indicators and Meat Thermometers
Genuine OEM Broil King Heat indicator. About 1 7/8 wide and 1 7/16 high. The threaded stem is about 5/16 diameter and 1 1/8 long.
Part Number: 10571-5
Dimensions: 1 7/8 x 1 7/16
Weight: 0.1
$15.11
9343-24NZ Miscellaneous Repair Parts
Hinge pin clip for Broil King model 9343-24NZ.
Part Number: S21233
Weight: 0.01
$1.08
Cotter pin for Broil King model 9343-24NZ.
Part Number: Y-11230
Weight: 0.01
$1.08
Cap stepped end leg plug for Broil King model 9343-24NZ.
Part Number: S21350
Weight: 0.1
$2.06
Washer for Broil King model 9343-24NZ.
Part Number: S21255
Weight: 0.01
$1.08
9343-24NZ Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 9343-24NZ.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
9343-24NZ Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10 x 13 3/4.
Part Number: 41338
Weight: 1.1
$22.60
15 Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Deluxe venturi brush with 11 coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31