Home > Broil-Mate Grill Models > Broil-Mate 764054
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil-Mate grill.
Replacement grill parts to fit Broil-Mate model: 764054
764054 Burners
Genuine OEM Broil-Mate stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
764054 Cooking Grids
Genuine OEM Broil-Mate
cooking grid.
Porcelain treated, matte finish. (Sold individually; number required varies, check your grill.)
Part Number: 52007-181
Dimension Front-to-Back: 17 3/8
Dimension Side-to-Side: 6 5/16
Material: cast iron
Weight: 3.10
$33.20
764054 FLAV-R-WAVE
Genuine OEM Broil-Mate stainless steel Flav-R-Wave for Broil-Mate model 764054.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8
Dimension Side-to-Side: 6
Material: stainless steel
Weight: 1.14
$21.93
764054 Igniter Components
Genuine OEM Broil-Mate electrode with 14 3/8 connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
Genuine OEM Broil-Mate electronic push-button 2-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4 mounting hole
- Also replaces part# 10342-242 and 10342-249
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-245
Weight: 0.3
$16.46
764054 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2 x 6
Material: stainless steel
Weight: .35
$7.60
Grease tray 440; porcelain flatte matte finish for Broil-Mate model 764054.
Part Number: 57055-901
Dimensions: 6 3/4 x 25 7/16
Material: porcelain steel
Weight: 1.25
$27.24
GREASE PAN - 330/440/550 for Broil-Mate model 764054.
Part Number: 52009-901
Dimensions: 5 1/8 x 6 1/2
Weight: .40
$15.11
Genuine OEM Broil-Mate Porcelain Grease Pan for Broil-Mate model 764054.
Part Number: 22009-901
Dimensions: 6 1/2 x 5 1/8
Weight: .45
$15.11
764054 Knobs and Handles
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Broil-Mate model 764054.
Part Number: 10472-K431
Weight: 0.1
$5.15
764054 Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
764054 Wheels and Castors
Wheel 6 plastic with 3/8 axle hole for Broil-Mate model 764054.
Part Number: 10892-608
Weight: 0.2
$7.28
Wheel bolt 3.25 long; uses one hinge pin part number S21233 not included for Broil-Mate model 764054.
Part Number: 10240-13
Weight: .10
$2.23
764054 Warming Racks
WARMING RACK 440 PORC (back support rod 25 5/8 and front support rod 26 3/16 warming rack 7 3/8 x 25) for Broil-Mate model 764054.
Part Number: 52005-991
Dimensions: 25 5/8
Weight: 3.3
$35.16
764054 Heat indicators and Meat Thermometers
Genuine OEM Broil-Mate Heat indicator. About 2 3/8 wide and 2 high. The threaded stem is about 5 /16 diameter and 1 1/8 long.
Part Number: 10571-6
Weight: 0.12
$17.76
764054 Miscellaneous Repair Parts
Hinge pin clip for Broil-Mate model 764054.
Part Number: S21233
Weight: 0.01
$1.08
764054 Hardware
LID BUMPER for Broil-Mate model 764054.
Part Number: Y-11231
Weight: 0.01
$1.08
764054 Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10 x 13 3/4.
Part Number: 41338
Weight: 1.1
$22.60
20 Professional Extra Long Tong.
20 Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9 x 13
Weight: 0.4
$8.64
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60