Home > Broil-Mate Grill Models > Broil-Mate 764057
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil-Mate grill.
Replacement grill parts for Broil-Mate model: 764057
764057 Burners
Genuine OEM Broil-Mate stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
764057 Cooking Grids
Genuine OEM Broil-Mate
cooking grid.
Porcelain treated, matte finish. (Sold individually; number required varies, check your grill.)
Part Number: 52007-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 6 5/16”
Material: cast iron
Weight: 3.10
$33.20
764057 FLAV-R-WAVE
Genuine OEM Broil-Mate stainless steel Flav-R-Wave for Broil-Mate model 764057.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14
$21.93
764057 Igniter Components
Genuine OEM Broil-Mate electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
Genuine OEM Broil-Mate electronic push-button 2-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4” mounting hole
- Also replaces part# 10342-242 and 10342-249
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-245
Weight: 0.3
$16.46
764057 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
Grease tray 440; porcelain flatte matte finish for Broil-Mate model 764057.
Part Number: 57055-901
Dimensions: 6 3/4” x 25 7/16”
Material: porcelain steel
Weight: 1.25
$27.24
GREASE PAN - 330/440/550 for Broil-Mate model 764057.
Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40
$15.11
Genuine OEM Broil-Mate Porcelain Grease Pan for Broil-Mate model 764057.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
764057 Knobs and Handles
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Broil-Mate model 764057.
Part Number: 10472-K431
Weight: 0.1
$5.15
764057 Regulators and Hoses
Genuine OEM Broil-Mate NG gas hose for Broil-Mate model 764057.
Part Number: 10111-K45
Weight: 2.1
$88.64
764057 Wheels and Castors
Wheel 6” plastic with 3/8” axle hole for Broil-Mate model 764057.
Part Number: 10892-608
Weight: 0.2
$7.28
Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included for Broil-Mate model 764057.
Part Number: 10240-13
Weight: .10
$2.23
764057 Warming Racks
WARMING RACK 440 PORC (back support rod 25 5/8” and front support rod 26 3/16” warming rack 7 3/8” x 25”) for Broil-Mate model 764057.
Part Number: 52005-991
Dimensions: 25 5/8
Weight: 3.3
$35.16
764057 Valves, Orifices, and Manifolds
VALVE ASSEMBLY 3V NG for Broil-Mate model 764057.
Part Number: 59004-017
Weight: 1.0
Image not available
$48.03
764057 Heat indicators and Meat Thermometers
Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
764057 Miscellaneous Repair Parts
Hinge pin clip for Broil-Mate model 764057.
Part Number: S21233
Weight: 0.01
$1.08
764057 Hardware
LID BUMPER for Broil-Mate model 764057.
Part Number: Y-11231
Weight: 0.01
$1.08
764057 Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57