Home > Broil-Mate Grill Models > Broil-Mate 785164
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil-Mate grill.
Part diagrams and owners manuals for Broil-Mate model: 785164
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for the Broil-Mate 785164
785164 Burners
Genuine OEM Broil-Mate stainless steel Dual-Tube burner. This part has been slightly changed by the manufacturer to include a small bend at the end that does not affect the fit on existing grills that use this part.
Note: The
adjustable air shutter on this burner should be set to 1/3 open for LP grills, 2/3 open for natural gas grills. The burner ships with the air shutter set 1/3 open for LP grills.
This burner is the same part as 22909-104NG and 22909-104LP. There is no difference in the parts, 22909-104NG has the air shutter set to 2/3 open for natural gas, 22909-104LP has the air shutter set to 1/3 open for LP.
Part Number: 22909-104
Dimensions: 17 1/8” x 1 1/4”
Material: Stainless steel
Weight: 1.0
$34.08
785164 Cooking Grids
Cast iron
cooking grid.
- Sold individually
- Number required varies, check your grill
- Porcelain enameled, glossy finish
Part Number: 22005-181-R
Dimension Front-to-Back: 19 1/16”
Dimension Side-to-Side: 12 1/2”
Material: Cast iron
Weight: 7.5
$59.36
785164 FLAV-R-WAVE
Genuine OEM Broil-Mate stainless steel Flav-R-Wave
heat plate / Vaporizer. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM replacement part, and it is sometimes marketed as part number 18433.
Part Number: 22209-904
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 5 7/8”
Material: Stainless steel
Weight: 1.15
$21.48
785164 Igniter Components
Genuine OEM Broil-Mate electronic push-button 3-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-246
Weight: 0.6
$18.48
Genuine OEM Broil-Mate collector box, complete. Replaces parts 10342-E400 and 10342-E401, which have been discontinued as separate parts.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E400A
Dimensions: 20 1/2
Weight: 0.75
$19.67
Genuine OEM Broil-Mate electrode and wire for side burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T10
Weight: 0.3
$10.00
Genuine OEM Broil-Mate rear collector box.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 22204-024
Dimensions: 27 1/8”
Material: stainless steel
Weight: 0.12
$12.38
785164 Grease Trays
Genuine OEM Broil-Mate Porcelain Grease Pan for Broil-Mate model 785164.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
785164 Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
785164 Wheels and Castors
Genuine OEM Broil-Mate caster, locking for Broil-Mate model 785164.
Part Number: 10892-25
Weight: 0.85
$12.71
785164 Warming Racks
Genuine OEM Broil-Mate porcelain coated warming rack for Broil-Mate model 785164.
Part Number: 22006-991
Dimensions: 32 5/8” x 8 1/2”
Material: porcelain steel
Weight: 6.0
$50.05
785164 Valves, Orifices, and Manifolds
CONTROL ASSEMBLY LP 4V for Broil-Mate model 785164.
Part Number: 29004-034
Weight: 1.0
Image not available
$101.01
785164 Heat indicators and Meat Thermometers
Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
785164 Miscellaneous Repair Parts
Hinge pin clip for Broil-Mate model 785164.
Part Number: S21233
Weight: 0.01
$1.08
Cotter pin for Broil-Mate model 785164.
Part Number: Y-11230
Weight: 0.01
$1.08
Genuine OEM Broil-Mate control panel heat shield, for 3-Burner grills. One required per grill.
Part Number: 22004-91
Weight: 1.3
$12.67
Washer for Broil-Mate model 785164.
Part Number: S21255
Weight: 0.01
$1.08
Genuine OEM Broil-Mate caster bracket for Broil-Mate model 785164.
Part Number: 21039-905
Dimensions: 22 5/8” x 4 1/2”
Weight: 2.6
$16.59
785164 Hardware
LID BUMPER for Broil-Mate model 785164.
Part Number: Y-11231
Weight: 0.01
$1.08
785164 Cart Parts
LOWER BASE SMALL LP 500 for Broil-Mate model 785164.
Part Number: 21095-445
Weight: 8.8
$48.64
785164 Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60