Bull Outdoor 24010 (Colt)

Left stainless steel burner with electrode mounting bracket. Fits all Straubelstone Steelman 24” and 36” grills.

Replaces Bull Outdoor factory part# Q24-QB-L

Part Number: 162L1
Dimensions: 15” x 7”
Material: stainless steel
Weight: 1.4

Right stainless steel burner with electrode mounting bracket. Fits all Straubelstone Steelman 24” and 36” grills.

Replaces Bull Outdoor factory part# Q24-QB-R

Part Number: 162R1
Dimensions: 15” x 7”
Material: stainless steel
Weight: 1.4

Porcelain steel cooking grids. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 56202
Dimension Front-to-Back: 15 5/8”
Dimension Side-to-Side: 23 1/2”
Material: porcelain steel wire
Weight: 11.0

One piece stainless burner plate for Bull Outdoor model 24010.

Replaces Bull Outdoor factory part# Q24-BPS-2414

Part Number: 96201
Dimension Front-to-Back: 13 15/16”
Dimension Side-to-Side: 23 3/8”
Material: stainless steel
Weight: 4.5

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Battery powered push button igniter.

• Has two (2) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Bull Outdoor factory part# Q24-CP-EI15

Part Number: IGEIB2-B
Weight: 0.3

Universal volt battery powered push button ignitor.

• 1.5 volt
• Has two (2) terminals (male spade connector)
• Uses a single AAA battery (not included)
• Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Bull Outdoor factory part# Q24-CP-EI15

Part Number: 03320
Weight: 0.3

Burner mounted electrode kit for Straubelstone left burner 162L1.

• Electrode with ceramic insulator
• Mounting bracket with nut and bolt
• 16” wire with female spade connector
• Protective sleeve

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Bull Outdoor factory part# Q24-IE-L

Part Number: 06300
Material: ceramic
Weight: 0.1

Burner mounted electrode kit for Straubelstone right burner 162R1.

• Electrode with ceramic insulator
• Mounting bracket with nut and bolt
• 16” wire with female spade connector
• Protective sleeve

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Bull Outdoor factory part# Q24-IE-R

Part Number: 06200
Material: ceramic
Weight: 0.1

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA .

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7