Model: 4617017

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 
   Home > Charbroil Grill Models > Charbroil 4617017

Thermos 2-Burner LP gas outdoor BBQ grill



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.

Replacement grill parts for Charbroil model: 4617017


 

4617017 Venturis

Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

$7.65








 

4617017 Cooking Grids

ONE PANEL. Genuine OEM cast iron cooking grid, single panel.

Part Number: 10225-T406
Material: Cast iron
Weight: 4.75
Dimensions:
  • Front-To-Back: 14 1/4″
  • Side-To_Side: 12 1/4″

$68.95






Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.
  • Made in USA
  • 304 commercial grade stainless steel
  • Solid .225 diameter stainless rods
  • Sold individually


Part Number: 55701-SS
Material: stainless steel
Weight: 5.0
Dimensions:
  • Front-To-Back: 14″
  • Side-To_Side: 24″

$83.82






Commercial grade 304 stainless steel cooking grid with 1/4” diameter rods. Made in USA .

Replaces Charbroil factory part# 4152739



Part Number: CG-45SS
Material: Stainless steel
Weight: 6.0
Dimensions:
  • Front-To-Back: 14″
  • Side-To_Side: 24″

$83.82








 

4617017 Vaporiser Bar

Stainless steel Vaporiser Bar (heat plate). Fits Charbroil MasterFlame series 7000 grills, others.

Replaces Charbroil factory part# 4156417



Part Number: 94171
Material: stainless steel
Weight: 0.6
Dimensions:
  • Front-To-Back: 23 7/16″
  • Side-To_Side: 2 1/2″

$22.63








 

4617017 Igniter Components

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-46B
Weight: 0.10
Dimensions: 2 1/2

$4.30






Genuine OEM 21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T14
Weight: 0.05
Dimensions: 21

$4.32






Push-Button self-grounding piezo spark generator. Color varies by manufacturer gray or black. Has round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. For more information, see our help center article Ignition 101.

Replaces Charbroil factory part# 4153713



Part Number: 03100
Weight: 0.1

$6.98






Collector box and ceramic electrode with male spade connector for models with 12112 or 11512 burners. Attaches directly to burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# 5156119



Part Number: 04420
Material: ceramic
Weight: 0.1

$10.03






25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03400
Weight: 0.1

$5.31






36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03500
Weight: 0.05

$5.42






Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610
Weight: 0.05

$8.29






14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03620
Weight: 0.1

$6.61








 

4617017 Knobs and Handles

Universal stainless steel lid handle. Adjusts from 21” hole centers, down to 10”. Includes mounting hardware. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0055
Material: stainless steel
Weight: 1.0
Dimensions: 23 5/8

$45.35






Universal 24” hardwood front lid handle. Designed to bolt through existing lid holes, if present. Sliding mounting hardware can adjust to holes up to 23” apart.

Replaces Charbroil factory part# 4059000



Part Number: 01200
Material: Wood
Weight: 0.8
Dimensions: 24

$19.58








 

4617017 Warming Racks

Chrome steel bottom warming rack for Charbroil 7000 series U-burner grills for Charbroil model 4617017.

Replaces Charbroil factory part# 4152124



Part Number: 02124
Material: chrome steel wire
Weight: 1.10
Dimensions:
  • Front-To-Back: 23 1/2″
  • Side-To_Side: 10 1/2″

$30.53








 

4617017 Accessories

7” Bamboo BBQ Kabobs. Appetizer Server/Grilling Skewers - pack of 50. Limited to supplies on hand.

  • Ideal for searving or grilling appetizers
  • Wide end for easy handling


Part Number: 11040
Weight: 0.4
Dimensions: 7

$4.75






4 Piece Stainless Steel Tool Set With Accents Turner, tong, and fork constructed of high gade, polished stainless steel, with soft grip accents. Silicone tip tongs heat resistant to 500 degrees farenheit. High quality grill brush.

Part Number: 40070
Material: stainless steel
Weight: 2.12

$39.08






Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.



Part Number: 14913
Material: stailess steel
Weight: 0.5

$14.41






Porcelain Coated Grill Topper.
11” x 16” Single draw construction for improved rigidity. Stainless steel handles and raised contours for improved functionality.

Part Number: 97122
Material: porcelain steel
Weight: 1.10
Dimensions: 16” x 11 1/2”

$29.08






Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2

$5.23







Charbroil 4617017 - 02-Nov-26



We ship Charbroil BBQ parts worldwide

Back to Charbroil grill parts


GRILLING  ACCESSORIES

Free USA shipping for orders of gas grill parts of $79 or more for Charbroil gas BBQ grills (contiguous 48 states only)

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy