Home > Charbroil Grill Models > Charbroil 4617064
Thermos 2-Burner LP gas outdoor BBQ grill with side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement BBQ grill parts for Charbroil model: 4617064
4617064 Venturis
Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.
Part Number: SG-B
Material: stainless steel
Weight: 0.1
4617064 Cooking Grids
ONE PANEL. Genuine OEM cast iron
cooking grid, single panel.
Part Number: 10225-T406
Material: Cast iron
Weight: 4.75
Dimensions:
- Front-To-Back: 14 1/4″
- Side-To_Side: 12 1/4″
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- Made in USA

- 304 commercial grade stainless steel
- Solid .225 diameter stainless rods
- Sold individually
Part Number: 55701-SS
Material: stainless steel
Weight: 5.0
Dimensions:
- Front-To-Back: 14″
- Side-To_Side: 24″
Commercial grade 304 stainless steel
cooking grid with 1/4” diameter rods. Made in USA

.
Replaces Charbroil factory part# 4152739
Part Number: CG-45SS
Material: Stainless steel
Weight: 6.0
Dimensions:
- Front-To-Back: 14″
- Side-To_Side: 24″
4617064 Vaporiser Bar
Stainless steel Vaporiser Bar (
heat plate). Fits Charbroil MasterFlame series 7000 grills, others.
Replaces Charbroil factory part# 4156417
Part Number: 94171
Material: stainless steel
Weight: 0.6
Dimensions:
- Front-To-Back: 23 7/16″
- Side-To_Side: 2 1/2″
4617064 Igniter Components
Universal 2 1/2” adaptor wire with a round female end and a male spade end.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-46B
Weight: 0.10
Dimensions: 2 1/2
Genuine OEM 21” wire for side burner or other applications. One female
spade connector, one female
round connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T14
Weight: 0.05
Dimensions: 21
Push-Button self-grounding
piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. Secondary connector is a flat male
spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part#
03620. For more information, see our article
Ignition 101.
Replaces Charbroil factory part# 5156113
Part Number: 03120
Weight: 0.1
Collector box and ceramic electrode with male
spade connector for models with 12112 or 11512 burners. Attaches directly to burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# 5156119
Part Number: 04420
Material: ceramic
Weight: 0.1
Push-button, snap-in
piezo ignitor with external ground tab; requires 7/8” mounting hole. Ground may be used to connect for side burner applications or an additional burner electrode. Also attaching a ground wire to any metal location will improve the operation of the ignitor. See part#
03620 for grounding wire. For more information, see our article
Ignition 101.
Part Number: 03130
Weight: 0.1
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
36” wire with two female
spade connectors for side burner igniters (not for use with rotary or
piezo ignitors).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03500
Weight: 0.05
Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
4617064 Warming Racks
Chrome steel bottom warming rack for Charbroil 7000 series U-burner grills for Charbroil model 4617064.
Replaces Charbroil factory part# 4152124
Part Number: 02124
Material: chrome steel wire
Weight: 1.10
Dimensions:
- Front-To-Back: 23 1/2″
- Side-To_Side: 10 1/2″
4617064 Accessories
Set of four 15” skewers. All stainless steel construction.
Unique v-shaped skewers keep food from spinning on shaft.
Part Number: 46074
Material: stainless steel
Weight: 0.4
Dimensions: 18” x 0 5/8”
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
Stainless Steel Basting Set.
Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.
Part Number: 14913
Material: stailess steel
Weight: 0.5
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Weight: 1.1
Dimensions: 6 1/2” x 10”
Stuffed Burger Press
The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.
Part Number: 24795
Weight: .3
|
Charbroil 4617064. We have a large inventory of BBQ accessories such as BBQ tools, baskets, grill covers in our accessories section. 02-Nov-26
|
We ship Charbroil BBQ parts worldwide
Back to Charbroil grill parts