Home > Charbroil Grill Models > Charbroil 463210310
Char-Broil LP gas outdoor BBQ grill with side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Part diagrams and owners manuals for Charbroil model: 463210310
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
|
Replacement grill parts to fit Charbroil model: 463210310
463210310 Burners
Stainless steel burner for Charbroil model 463210310.
Replaces Charbroil factory part# 263602100221
Part Number: 11031
Material: stainless steel
Weight: 0.9
Dimensions: 17 1/2” x 1”
463210310 Burner Brackets and Carryovers
stainless steel cross-over burner for Charbroil model 463210310.
Replaces Charbroil factory part# 263602100278
Part Number: 06590
Material: stainless steel
Weight: 0.2
Dimensions: 6 1/2” x 0 15/16”
463210310 Cooking Grids
Stainless steel
cooking grids. Sold as a set of three (3).
Part Number: 5S443
Material: stainless steel tubes
Weight: 7.7
Dimensions:
- Front-To-Back: 18 5/8″
- Side-To_Side: 25 11/16″
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 60193-UNI-X3 for a set of three (3).
Part Number: 60193-UNI
Material: cast iron
Weight: 6.45
Dimensions:
- Front-To-Back: 18 3/4″
- Side-To_Side: 9 1/2″
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.
Part Number: 65131-UNI
Material: cast iron
Weight: 5.55
Dimensions:
- Front-To-Back: 18 3/4″
- Side-To_Side: 7 5/8″
463210310 Heat Shields
Stainless steel Heat Shield. Made in USA

.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0134
Material: stainless steel
Weight: 0.69
Dimensions:
- Front-To-Back: 16 1/2″
- Side-To_Side: 4″
Stainless steel heat shield/ Flame Tamer. Sold individually, number required varies.
Replaces Charbroil factory part# 263602100215
Part Number: BBQHP3
Material: stainless steel
Weight: 0.7
Dimensions:
- Front-To-Back: 16 9/16″
- Side-To_Side: 4″
463210310 Igniter Components
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Weight: 0.1
Dimensions: 46
Electrode and wire with a female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# 263602100210
Part Number: 01031
Material: ceramic
Weight: 0.1
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# 263602100281
Part Number: IGEIB2-B
Weight: 0.3
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# 263602100281
Part Number: 03320
Weight: 0.3
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
463210310 Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 1 13/16” diameter
- Requires 3/8” mounting hole
Replaces Charbroil factory part# 263602100208
Part Number: 00018
Weight: 0.1
Dimensions: 1 13/16” x 1 13/16”
463210310 Accessories
GrillPro Wood chips from genuine oak whiskey barrels.
- All natural wood smoke flavor
- Great for use in BBQ's or smokers.
- 170 cubic inches (2 lbs. approx) in resealable bag
Try with beef, burgers, pork, lamb, poultry, and fish.
Part Number: 00215
Weight: 2.0
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Material: stainless steel
Weight: 0.5
Dimensions: 8 1/4
Stainless Steel Basting Set.
Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.
Part Number: 14913
Material: stailess steel
Weight: 0.5
Non-Stick Wing Rack. A convenient non-stick coated wire wing rack with folding legs, the best way to roast chicken legs and wings on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.
Part Number: 41551
Weight: 0.5
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
|
Charbroil 463210310 - 02-Nov-26
|
We ship Charbroil BBQ parts worldwide
Back to Charbroil grill parts