Home > Charbroil Grill Models > Charbroil 463211511
Char-Broil LP gas outdoor BBQ grill with side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Part diagrams and owners manuals for Charbroil model: 463211511
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
|
Replacement grill parts to fit Charbroil model: 463211511
463211511 Burners
Stainless steel burner for Charbroil model 463211511.
Part Number: 11031
Material: stainless steel
Weight: 0.9
Dimensions: 17 1/2 x 1
Stainless steel burner for Charbroil model 463211511.
Replaces Charbroil factory part# G560-5800-W1
Part Number: 15121
Material: stainless steel
Weight: 0.6
Dimensions: 18 13/16 x 1
463211511 Burner Brackets and Carryovers
stainless steel cross-over burner for Charbroil model 463211511.
Replaces Charbroil factory part# G560-0010-W1
Part Number: 06590
Material: stainless steel
Weight: 0.2
Dimensions: 6 1/2 x 0 15/16
463211511 Cooking Grids
Stainless steel
cooking grids. Sold as a set of three (3).
Part Number: 5S443
Material: stainless steel tubes
Weight: 7.7
Dimensions:
- Front-To-Back: 18 5/8″
- Side-To_Side: 25 11/16″
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 60193-UNI-X3 for a set of three (3).
Part Number: 60193-UNI
Material: cast iron
Weight: 6.45
Dimensions:
- Front-To-Back: 18 3/4″
- Side-To_Side: 9 1/2″
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.
Part Number: 65131-UNI
Material: cast iron
Weight: 5.55
Dimensions:
- Front-To-Back: 18 3/4″
- Side-To_Side: 7 5/8″
Cast iron
cooking grid.
Porcelain treated, matte finish. Sold individually, number required varies by grill model.
Replaces Charbroil factory part# G560-0005-W1
Part Number: CG-71P-CI
Material: cast iron
Weight: 5.55
Dimensions:
- Front-To-Back: 18 3/4″
- Side-To_Side: 7 5/8″
463211511 Heat Shields
Stainless steel Heat Shield. Made in USA

.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0134
Material: stainless steel
Weight: 0.69
Dimensions:
- Front-To-Back: 16 1/2″
- Side-To_Side: 4″
Stainless steel heat shield/ Flame Tamer. Sold individually, number required varies.
Replaces Charbroil factory part# G560-0006-W1
Part Number: BBQHP3
Material: stainless steel
Weight: 0.7
Dimensions:
- Front-To-Back: 16 9/16″
- Side-To_Side: 4″
463211511 Igniter Components
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
46 Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Weight: 0.1
Dimensions: 46
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4 or 13/16 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# F401-0012-W1
Part Number: IGEIB2-B
Weight: 0.3
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# F401-0012-W1
Part Number: 03320
Weight: 0.3
Electrode and wire with a female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# G560-0009-W1
Part Number: 01031
Material: ceramic
Weight: 0.1
Ignition connection wire used to connect battery powered spark generators to electrodes. One 46 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
463211511 Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 1 13/16 diameter
- Requires 3/8 mounting hole
Replaces Charbroil factory part# G431-0020-W2
Part Number: 00018
Weight: 0.1
Dimensions: 1 13/16 x 1 13/16
463211511 Accessories
Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.
Part Number: 00281
Weight: .45
Dimensions: 11 7/8
2 in 1 chrome plated turner / tong with PVC coated handle
Part Number: 40730
Material: chrome steel
Weight: 0.6
Dimensions: 14
Deluxe 13 basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.
Part Number: 42055
Weight: 0.2
Dimensions: 13
Porcelain Coated Round Topper.
11 diameter x 2.5 deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.
Part Number: 98130
Material: porcelain steel
Weight: 1.0
Dimensions: 11
GrillPro EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
This tank gauge will monitor your propane level, while you grill, and let's you know when you're running low on gas.
The magnetic tank gauge offers fast, accurate propane level monitoring for any size LP tank. The magnetic backing makes it easy to attach, remove, and reuse across multiple tanksperfect for grilling, camping, patio heaters, and more
Made in USA
Part Number: 00030
Weight: 0.1
|
Charbroil 463211511 - 02-Nov-26
|
We ship Charbroil BBQ parts worldwide
Back to Charbroil grill parts