Home > Charbroil Grill Models > Charbroil 463230112Char-Broil LP gas outdoor BBQ grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Part diagrams and owners manuals for Charbroil model: 463230112 (Classic)
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for the Charbroil 463230112 (Classic)
463230112 (Classic) Burners
Stainless steel straight pipe burner; uses electrode/wire # 04432 for Charbroil model 463230112.
Replaces Charbroil factory part# G431-0300-W2
Part Number: 16781
Dimensions: 14 11/16” x 1”
Material: stainless steel
Weight: 0.7
$32.54
463230112 (Classic) Burner Brackets and Carryovers
Burner crossover tube for Charbroil model 463230112.
Replaces Charbroil factory part# G501-0015-W1
Part Number: 05590
Dimensions: 7 1/4” x 0 3/4”
Material: stainless steel
Weight: 0.1
$14.09
463230112 (Classic) Cooking Grids
Porcelain steel
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of four (4).
Part Number: 50194
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 37 3/4”
Material: porcelain steel channels
Weight: 9.2
$91.81
Channel formed U-shaped porcelain steel
cooking grids.
Channel formed means rolled steel stamped into a U-shape; is not solid round rods.
Porcelain enameled, glossy finish. Sold as a set of three (3).
Replaces Charbroil factory part# G432-1800-W1
Part Number: 50193
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 28 5/16”
Material: porcelain steel channels
Weight: 6.7
$81.64
463230112 (Classic) Heat Tents
Stainless steel aftermarket vented Heat Tent.
- Stainless equivalent of part 98531
- Sold individually
- Made in USA
Part Number: 98531-SS
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.7
$23.47
Porcelain steel Heat Tent. Sold individually. Fits many Urban, Range Master, Kenmore, Thermos and Char-Broil Classic grills.
This part replaces original part numbers: 80008530, 80029725, G430-0005-W1.
Part Number: 98531
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: porcelain steel
Weight: 0.6
$35.00 $23.49
463230112 (Classic) Igniter Components
Universal 2 5/8” adapter wire with female round and male
spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory
piezo spark generators have male
round connectors, while battery operated electronic spark generators usually have male
spade connectors.
- Can change male round to male spade
- Can change female spade to female round
ALL
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03198
Weight: 0.05
$5.35
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
Electrode with 24.5” wire that has a female spade/flat end for Charbroil model 463230112. To lengthen the wire use adapter # 03198 and extension wire # 03750.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04432
Dimensions: 4”
Material: ceramic
Weight: 0.1
$9.89
Small AA battery powered push button spark generator.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# G409-0021-W1
Part Number: 03342
Weight: 0.3
$31.50
Burner mounted electrode for use with 15591 and 15491 burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# G501-0010-W2
Part Number: 04430
Material: ceramic
Weight: 0.1
$12.47
electrode
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# G651-5103-W1
Part Number: 05223
Material: ceramic
Weight: 0.1
$9.42
463230112 (Classic) Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 1 13/16” diameter
- Requires 3/8” mounting hole
Replaces Charbroil factory part# G430-0022-W1
Part Number: 00018
Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1
$15.11
463230112 (Classic) Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96