Home > Charbroil Grill Models > Charbroil 463230514
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement BBQ grill parts for Charbroil model: 463230514
463230514 Burners
Stainless steel burner for Charbroil model 463230514.
Part Number: 15491
Dimensions: 14 3/8” x 1”
Material: stainless steel
Weight: 0.9
$34.77
463230514 Burner Brackets and Carryovers
stainless steel cross-over burner for Charbroil model 463230514.
Part Number: 05592
Dimensions: 6 3/8” x 0 13/16”
Material: stainless steel
Weight: 0.1
$14.85
463230514 Cooking Grids
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of four (4).
Part Number: 68764
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 37 1/4”
Material: gloss cast iron
Weight: 18.1
$121.32
463230514 Heat Tents
Porcelain steel Heat Tent. Sold individually. Fits many Urban, Range Master, Kenmore, Thermos and Char-Broil Classic grills.
This part replaces original part numbers: 80008530, 80029725, G430-0005-W1.
Part Number: 98531
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: porcelain steel
Weight: 0.6
$35.00 $23.49
Stainless steel aftermarket vented Heat Tent.
- Stainless equivalent of part 98531
- Sold individually
- Made in USA
Part Number: 98531-SS
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.7
$23.47
463230514 Igniter Components
Universal 2 5/8” adapter wire with female round and male
spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory
piezo spark generators have male
round connectors, while battery operated electronic spark generators usually have male
spade connectors.
- Can change male round to male spade
- Can change female spade to female round
ALL
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03198
Weight: 0.05
$5.35
Burner mounted replacement electrode for use with burner 15641.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03351
Material: ceramic
Weight: 0.2
$12.38
Push-button electronic igniter with three (3)
spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG3007
Weight: 0.2
$37.10 $14.99
Universal three-outlet battery powered push button ignitor.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5
$33.89
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
Electrode with 24.5” wire that has a female spade/flat end for Charbroil model 463230514. To lengthen the wire use adapter # 03198 and extension wire # 03750.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04432
Dimensions: 4”
Material: ceramic
Weight: 0.1
$9.89
electrode
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 05223
Material: ceramic
Weight: 0.1
$9.42
463230514 Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 1 13/16” diameter
- Requires 3/8” mounting hole
Part Number: 00018
Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1
$15.11
463230514 Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96