Model: 463232011

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 
   Home > Charbroil Grill Models > Charbroil 463232011

Char-Broil 3-Burner LP gas outdoor BBQ grill with side burner



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.

Part diagrams and owners manuals for Charbroil model: 463232011



Click small image to enlarge. Click Large image to reduce.
Double click for new window
Exploded parts diagram for model: 463232011

Replacement grill parts to fit Charbroil model: 463232011


 

463232011 Burners

Stainless steel burner for Charbroil model 463232011.

Replaces Charbroil factory part# G515-2200-W1



Part Number: 14741
Material: stainless steel
Weight: 0.5
Dimensions: 15 15/16” x 1”

$33.86








 

463232011 Cooking Grids

Stamped stainless steel cooking grids (set of 3). Each grid is a grid-in-tray assembly, so there is actually a total of 6 pieces.

Part Number: 5S483
Material: stamped stainless steel
Weight: 15.4
Dimensions:
  • Front-To-Back: 18 7/16″
  • Side-To_Side: 26 5/8″

$219.28








 

463232011 Cooking Grates

Stamped stainless steel cooking grids. SOLD AS A SET OF THREE (3) PIECES ONLY.
WARNING: This cooking grid set does not include the bottom trays. For the grid in tray set see part # 5S483.

Replaces Charbroil factory part# G519-4500-W1



Part Number: 5S473
Material: stamped stainless steel
Weight: 8.0
Dimensions:
  • Front-To-Back: 18 7/16″
  • Side-To_Side: 26 5/8″

$110.32








 

463232011 Heat Plates

SET OF FOUR/4 PACK Flame Tamer, stainless steel. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0141-X4
Material: stainless steel
Weight: 3.92
Dimensions:
  • Front-To-Back: 16″
  • Side-To_Side: 3 3/4″

$79.72






Flame Tamer, stainless steel. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0141
Material: stainless steel
Weight: 0.98
Dimensions:
  • Front-To-Back: 16″
  • Side-To_Side: 3 3/4″

$22.91








 

463232011 Flame Tamers

Stainless steel aftermarket Flame Tamer heat plate.
  • Stainless equivalent of part 93321
  • Superior to the porcelain steel originals
  • Rust and corrosion restitant
  • Sold individually
  • Made in USA


Part Number: 93321-SS
Material: stainless steel
Weight: 0.7
Dimensions:
  • Front-To-Back: 16″
  • Side-To_Side: 3 3/4″

$22.91






Stainless steel heat plate/Flame Tamer for Charbroil model 463232011.

Replaces Charbroil factory part# G501-0008-W1



Part Number: CBHP2
Material: stainless steel
Weight: 0.7
Dimensions:
  • Front-To-Back: 16″
  • Side-To_Side: 3 3/4″

$22.91








 

463232011 Igniter Components

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-46B
Weight: 0.10
Dimensions: 2 1/2

$4.30






Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
  • 1.5 volt
  • Has four(4) spark outlets (male spade connector)
  • Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
  • Uses a single AA battery (not included)
  • Requires 7/8” mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# G511-0055-W1



Part Number: 03344
Weight: 0.5
Dimensions: 2” x 2 1/2”

$42.71






Electrode, gas collector box, and wire. The connecting wire has a flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

NOTE: This electrode is also sometimes used with push-button or rotary piezo ignitors, such as our part# 03100 and 03120, which have round connectors. When connecting 01472 electrode to ignitors with round connectors, use short wire part# 03199C to convert the electrode wire from a femal spade connector to a female round connector.

Replaces Charbroil factory part# G515-0014-W1



Part Number: 01472
Material: ceramic
Weight: 0.1

$10.90






Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# G515-0017-W1A



Part Number: 03152
Weight: 0.1
Dimensions: 17 3/4” x 1”

$32.51








 

463232011 Heat indicators and Meat Thermometers

Semi-circular, snap in heat indicator with 2 3/4” heat prob for Charbroil model 463232011.

Replaces Charbroil factory part# G516-0008-W1



Part Number: 00473
Material: stainless steel
Weight: 0.1
Dimensions: 1 3/4” x 1 3/16”

$14.09








 

463232011 Accessories

GrillPro Wood chips from genuine oak whiskey barrels.
  • All natural wood smoke flavor
  • Great for use in BBQ's or smokers.
  • 170 cubic inches (2 lbs. approx) in resealable bag

Try with beef, burgers, pork, lamb, poultry, and fish.

Part Number: 00215
Weight: 2.0

$9.34






20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

$21.26






Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.



Part Number: 14913
Material: stailess steel
Weight: 0.5

$14.41






Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
  • Ideal for cooking pieces of meat or vegetables
  • Self basting, easy to use
  • Locks on spit rod with thumb screw (supplied)
  • 6 1/2” x 10” long


Part Number: 24764
Weight: 1.1
Dimensions: 6 1/2” x 10”

$19.30






Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most



Part Number: 90963
Weight: 0.2

$19.30







Charbroil 463232011 - 02-Nov-26



We ship Charbroil BBQ parts worldwide

Back to Charbroil grill parts


GRILLING  ACCESSORIES

Replacement parts orders for Charbroil grills $79 and more shipped to the USA (contiguous 48 states only) Free of charge.

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy