Home > Charbroil Grill Models > Charbroil 463241014Char-Broil Commercial 2 Burner Gas Grill T-22D
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement grill parts for Charbroil model: 463241014 (Commercial)
463241014 (Commercial) Burners
Stainless steel burner for Charbroil model 463241014.
Part Number: CBP5
Dimensions: 15 7/8 x 1
Material: stainless steel
Weight: 1.0
$33.83
Stainless steel burner for Charbroil model 463241014.
Replaces Charbroil factory part# G356-2200-W1
Part Number: 14741
Dimensions: 15 15/16 x 1
Material: stainless steel
Weight: 0.5
$33.83
463241014 (Commercial) Cooking Grids
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Replaces Charbroil factory part# 80021355
Part Number: 61122
Dimension Front-to-Back: 18 5/16
Dimension Side-to-Side: 16 5/8
Material: matte cast iron
Weight: 12.7
$88.59
Infrared Cooking Grate Emitter. This replaces the Charbroil infrared emitter tray which, when paired with our CG-111PCI Cast Iron Cooking Grate, radiates and transmits heat to grill food without exposure to flame. If the part is heavily rusted or damaged it needs to be replaced.
CG-111SS stainless steel emitter is sold individuallymore than one may be required for your grill. This emitter tray is designed to be paired with CG-111P-CI cast iron cooking gratewhich is sold separately.
See part CG-111SET for an emitter and grate sold as a set of two.
Part Number: CG-111SS
Dimension Front-to-Back: 18 1/4
Dimension Side-to-Side: 8 7/8
Material: stainless steel
Weight: 1.75
$29.08
463241014 (Commercial) Cooking Grates
Infrared Emitter and Cast Iron Cooking Grate set. This set of two pieces replaces the Charbroil infrared emitter tray (IR housing) AND the cast iron cooking grate.
Includes:
- One (1) CG-111SS stainless steel Emitter Tray
- One (1) CG-111PCI cast iron cooking grate 18 1/4 x 8 1/4.
CG-111PCI grid rests on top of emitter tray CG-111SS. Multiple sets required, number varies by grill model.
Part Number: CG-111SET
Dimension Front-to-Back: 18 1/4
Dimension Side-to-Side: 8 7/8
Material: stainless steel
Weight: 8.25
Image not available
$70.20
463241014 (Commercial) Heat Tents
Porcelain steel Heat Tent. Sold individually.
Replaces Charbroil factory part# G527-0013-W1
Part Number: 97321
Dimension Front-to-Back: 16 7/16
Dimension Side-to-Side: 3 3/4
Material: porcelain steel
Weight: 0.7
$24.59
463241014 (Commercial) Igniter Components
Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03152
Dimensions: 17 3/4 x 1
Weight: 0.1
$19.80
Universal 2 3/4 adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has two (2) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8 mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# G350-0017-W1
Part Number: 03322
Dimensions: 2 5/8 x 2
Weight: 0.5
$35.57
Electrode, gas collector box, and wire. The connecting wire has a flat female
spade connector, which is typically used with electronic (battery operated) ignitors (see
Ignition 101 in our help center).
NOTE: This electrode is also sometimes used with push-button or rotary
piezo ignitors, such as our part#
03100 and
03120, which have
round connectors. When connecting 01472 electrode to ignitors with
round connectors, use short wire part#
03199C to convert the electrode wire from a femal
spade connector to a female
round connector.
Replaces Charbroil factory part# G350-0064-W1
Part Number: 01472
Material: ceramic
Weight: 0.1
$10.87
463241014 (Commercial) Heat indicators and Meat Thermometers
Semi-circular, snap in heat indicator with 3 3/4 heat prob for Charbroil model 463241014.
Replaces Charbroil factory part# G527-0012-W1
Part Number: 00472
Dimensions: 1 3/4 x 1 1/4
Material: stainless steel
Weight: 0.01
$13.42
463241014 (Commercial) Accessories
HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.
Part Number: 0-7611-2014-9
Dimensions: 8 x 9 1/4
Material: Paperback
Weight: 3.0
$20.09
Deluxe 17 stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Deluxe venturi brush with 11 coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31