Home > Charbroil Grill Models > Charbroil 463251512Char-Broil Char-Broil C-58G4
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement grill parts to fit Charbroil model: 463251512
463251512 Burners
Stainless steel burner for Charbroil model 463251512.
Part Number: 14741
Dimensions: 15 15/16” x 1”
Material: stainless steel
Weight: 0.5
$33.83
463251512 Burner Brackets and Carryovers
stainless steel cross-over burner for Charbroil model 463251512.
Part Number: 05592
Dimensions: 6 3/8” x 0 13/16”
Material: stainless steel
Weight: 0.1
$14.85
463251512 Heat Plates
SET OF FOUR/4 PACK Flame Tamer, stainless steel. Made in USA
.
NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0141-X4
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 3.92
$56.88
Flame Tamer, stainless steel. Made in USA
.
NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0141
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.98
$21.87
463251512 Flame Tamers
Porcelain steel Flame Tamer. Sold individually.
Part Number: 93321
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 1.0
$25.40 $20.90
Stainless steel aftermarket Flame Tamer
heat plate.
- Stainless equivalent of part 93321
- Superior to the porcelain steel originals
- Rust and corrosion restitant
- Sold individually
- Made in USA
Part Number: 93321-SS
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.7
$21.87
463251512 Igniter Components
Electrode, gas collector box, and wire. The connecting wire has a flat female
spade connector, which is typically used with electronic (battery operated) ignitors (see
Ignition 101 in our help center).
NOTE: This electrode is also sometimes used with push-button or rotary
piezo ignitors, such as our part#
03100 and
03120, which have
round connectors. When connecting 01472 electrode to ignitors with
round connectors, use short wire part#
03199C to convert the electrode wire from a femal
spade connector to a female
round connector.
Part Number: 01472
Material: ceramic
Weight: 0.1
$10.87
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
Small AA battery powered push button spark generator.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03342
Weight: 0.3
$31.50
463251512 Heat indicators and Meat Thermometers
Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut.
- Requires minimum 3/8” mounting hole
- Single 1 3/8” probe
- Threaded portion of probe stops at 1/2” from base
- See photo for details
Part Number: 00012
Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1
$15.16
463251512 Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60