Home > Charbroil Grill Models > Charbroil 463273615Char-Broil Performance 2 Burner Gas Grill T-22D
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement BBQ grill parts for Charbroil model: 463273615 (Performance)
Stainless steel burner for Charbroil model 463273615.
Part Number: 14741
Dimensions: 15 15/16 x 1
Material: stainless steel
Weight: 0.5
$33.83
Stamped stainless steel
cooking grids. Sold as a set of two (2). Each panel is an emitter tray and a grid-in-tray assembly, a total of 4 pieces.
Part Number: 5S482
Dimension Front-to-Back: 18 7/16
Dimension Side-to-Side: 17 3/4
Material: stamped stainless steel
Weight: 10.6
$149.04
Stamped stainless steel
cooking grids (set of 3). Each grid is a grid-in-tray assembly, so there is actually a total of 6 pieces.
Part Number: 5S483
Dimension Front-to-Back: 18 7/16
Dimension Side-to-Side: 26 5/8
Material: stamped stainless steel
Weight: 15.4
$208.84
Infrared slotted stamped stainless steel
cooking grid that features slotted grease drain holes for improved performance. SOLD AS A SET OF TWO (2) PIECES ONLY.
WARNING: This
cooking grid set does not include the bottom trays. The grid-in-tray set of four pieces was discontinued by our supplier.
Part Number: 5S472
Dimension Front-to-Back: 18 7/16
Dimension Side-to-Side: 17 3/4
Material: stamped stainless steel
Weight: 5.5
$74.55
Stamped stainless steel
cooking grids. SOLD AS A SET OF THREE (3) PIECES ONLY.
WARNING: This
cooking grid set does not include the bottom trays. For the grid in tray set see part # 5S483.
Replaces Charbroil factory part# G519-A400-W1
Part Number: 5S473
Dimension Front-to-Back: 18 7/16
Dimension Side-to-Side: 26 5/8
Material: stamped stainless steel
Weight: 8.0
$110.32
Electrode, gas collector box, and wire. The connecting wire has a flat female
spade connector, which is typically used with electronic (battery operated) ignitors (see
Ignition 101 in our help center).
NOTE: This electrode is also sometimes used with push-button or rotary
piezo ignitors, such as our part#
03100 and
03120, which have
round connectors. When connecting 01472 electrode to ignitors with
round connectors, use short wire part#
03199C to convert the electrode wire from a femal
spade connector to a female
round connector.
Part Number: 01472
Material: ceramic
Weight: 0.1
$10.87
Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03152
Dimensions: 17 3/4 x 1
Weight: 0.1
$19.80
Universal 2 3/4 adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has two (2) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8 mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03322
Dimensions: 2 5/8 x 2
Weight: 0.5
$35.57
Semi-circular, snap in heat indicator with 2 3/4 heat prob for Charbroil model 463273615.
Part Number: 00473
Dimensions: 1 3/4 x 1 3/16
Material: stainless steel
Weight: 0.1
$14.09
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
15 Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Deluxe non-stick flat spit basket. Attaches to 3/8 rotisserie rod with adjustable lid to secure food. 16x7.5x2
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2 x 16
Weight: 1.5
$22.60
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96