Home > Charbroil Grill Models > Charbroil 463361017Char-Broil Performance Series 4 Burner Gas Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Part diagrams and owners manuals for Charbroil model: 463361017 (Performance)
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for the Charbroil 463361017 (Performance)
stainless steel burner for Charbroil model 463361017.
Part Number: 10081
Dimensions: 17 3/4 x 0 5/8
Material: stainless steel
Weight: 0.4
$36.16
stainless steel cross-over burner for Charbroil model 463361017.
Replaces Charbroil factory part# G651-0068-W1
Part Number: 05592
Dimensions: 6 3/8 x 0 13/16
Material: stainless steel
Weight: 0.1
$14.85
matte finish cast iron
cooking grid for Charbroil model 463361017.
Part Number: 60163
Dimension Front-to-Back: 18 3/16
Dimension Side-to-Side: 25
Material: matte cast iron
Weight: 12.0
$119.50
stainless steel Heat Tent for Charbroil model 463361017.
Part Number: 90061
Dimension Front-to-Back: 17
Dimension Side-to-Side: 2 1/16
Material: stainless steel
Weight: 0.6
$17.70
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4 or 13/16 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB2-B
Weight: 0.3
$31.52
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03320
Weight: 0.3
$27.78
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
$16.46
Ignition electrode.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04450
Dimensions: 3 5/16 x 0 7/8
Weight: 0.1
$9.89
Round heat indicator.
- Single probe
- 1 13/16 diameter
- Requires 3/8 mounting hole
Part Number: 00018
Dimensions: 1 13/16 x 1 13/16
Weight: 0.1
$15.11
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
16 Stainless Steel Tong/Turner Combination. 16 multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60