Home > Charbroil Grill Models > Charbroil 463363006Char-Broil Advantage Series 3-Burner LP gas grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Part diagrams and owners manuals for Charbroil model: 463363006 (Advantage)
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement gas grill parts for Charbroil model: 463363006 (Advantage)
463363006 (Advantage) Burners
Stainless steel burner for Performance and Advantage series grills for Charbroil model 463363006.
Replaces Charbroil factory part# 7000083
Part Number: 14631
Dimensions: 13 11/16” x 3 3/8”
Material: stainless steel
Weight: 0.9
$34.77
Cast iron burner for Charbroil Performance and Advantage series grills. Interchangable with the stainless steel version.
Part Number: CBP1-CI
Dimensions: 13 3/4” x 3 3/8”
Material: cast iron
Weight: 6.0
$41.02
463363006 (Advantage) Burner Brackets and Carryovers
Heavy 20 gauge stainless steel burner mounting bracket. Also called a cross over channel. Made in USA
. Replaces Charbroil OEM part# 7000278. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-MS0045
Dimensions: 17 5/16
Material: stainless steel
Weight: 0.2
$23.38
463363006 (Advantage) Cooking Grids
Porcelain steel
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Replaces Charbroil factory part# 7000028
Part Number: 54632
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 23 7/8”
Material: porcelain steel wire
Weight: 6.13
$76.62
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.
- Made in USA
- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2).
Each panel measures:- Front-to-Back: 15”
- Side-to-Side: 11 3/8”
Total Side-to-Side: 22 3/4”Part Number: 54632-SS-X2
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 22 3/4”
Material: stainless steel
Weight: 6.8
$87.46
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- Made in USA
- 304 commercial grade stainless steel
- Solid .225 diameter stainless rods
- Sold individually
Fits grills by Arkla, Falcon, Charbroil, Kenmore and Thermos. May fit others.
Part Number: 54632-SS
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 11 3/8”
Material: stainless steel
Weight: 3.40
$48.38
463363006 (Advantage) Heat Plates
SET OF THREE/3 PACK Stainless steel
heat plate. Made in USA
.
Note: Not identical to original, but a fully functional replacement.
Note: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0144-X3
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 5 9/16”
Material: stainless steel
Weight: 1.8
$64.61
Stainless steel
heat plate. Made in USA
.
Note: Not identical to original, but a fully functional replacement.
Note: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0144
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 5 9/16”
Material: stainless steel
Weight: 0.60
$24.42
463363006 (Advantage) Vaporiser Bar
Porcelain steel Vaporiser Tent. Sold individually.
Replaces Charbroil factory part# 7000381
Part Number: 94631
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 5 5/8”
Material: porcelain steel
Weight: 1.0
$25.40 $20.90
463363006 (Advantage) Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Push-Button self-grounding
piezo spark generator. Has round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. For more information, see our help center article
Ignition 101.
Replaces Charbroil factory part# 4153713
Part Number: 03100
Weight: 0.1
$9.25
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
Ceramic electrode for use with CBP1-CI cast iron burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-24B
Weight: 0.3
$7.91
463363006 (Advantage) Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 1 13/16” diameter
- Requires 3/8” mounting hole
Replaces Charbroil factory part# 4157171
Part Number: 00018
Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1
$15.11
463363006 (Advantage) Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6
$22.70
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73