Home > Charbroil Grill Models > Charbroil 463371116Char-Broil Performance Series TRU-Infrared 3-Burner Gas Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement grill parts for Charbroil model: 463371116 (Performance)
Stainless steel 5/8 tube burner for Charbroil model 463371116.
Part Number: 14761
Dimensions: 14 3/4 x 5/8
Material: stainless steel
Weight: 0.3
$33.45
Burner crossover tube for Charbroil model 463371116.
Part Number: 05591
Dimensions: 8 13/16 x 0 3/4
Material: stainless steel
Weight: 0.1
$14.09
Premium quality heavy duty stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.
Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 7 pounds of solid stainless each.
- 304 commercial grade stainless steel
- Large diameter 5/16 solid stainless rods
- Dimensions: 17 x 12 5/8
- Made in USA .
- Sold individually.
Part Number: CLA-GS0114
Dimension Front-to-Back: 17
Dimension Side-to-Side: 12 5/8
Material: stainless steel
Weight: 7.2
$127.37
Porcelain stamped steel
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of three (3).
Part Number: 53173
Dimension Front-to-Back: 16 15/16
Dimension Side-to-Side: 25 1/2
Material: porcelain steel
Weight: 9.4
$114.84
Stainless steel Heat Tent. Sold individually.
Part Number: 92131
Dimension Front-to-Back: 15 9/16
Dimension Side-to-Side: 1 15/16
Material: stainless steel
Weight: 0.8
$17.59
Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03152
Dimensions: 17 3/4 x 1
Weight: 0.1
$19.80
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has four(4) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8 mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03344
Dimensions: 2 x 2 1/2
Weight: 0.5
$37.92
Ignition electrode.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04450
Dimensions: 3 5/16 x 0 7/8
Weight: 0.1
$9.89
Round heat indicator.
- Single probe
- 1 13/16 diameter
- Requires 3/8 mounting hole
Part Number: 00018
Dimensions: 1 13/16 x 1 13/16
Weight: 0.1
$15.11
shishkebob skewers
Part Number: 46074
Dimensions: 18 x 0 5/8
Material: stainless steel
Weight: 0.4
$6.64
Deluxe 17 stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick flat spit basket. Attaches to 3/8 rotisserie rod with adjustable lid to secure food. 16x7.5x2
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2 x 16
Weight: 1.5
$22.60
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8 x 3 1/2
Weight: 0.7
$25.57