Home > Charbroil Grill Models > Charbroil 463441412
Rangemaster Classic C-45G3CB 4-Burner LP gas outdoor BBQ grill with side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement grill parts for the Charbroil 463441412 (Rangemaster)
463441412 (Rangemaster) Burners
Stainless steel burner for Charbroil model 463441412.
Part Number: 15491
Material: stainless steel
Weight: 0.9
Dimensions: 14 3/8” x 1”
463441412 (Rangemaster) Burner Brackets and Carryovers
Burner crossover tube for Charbroil model 463441412.
Part Number: 05590
Material: stainless steel
Weight: 0.1
Dimensions: 7 1/4” x 0 3/4”
463441412 (Rangemaster) Cooking Grids
Channel formed U-shaped porcelain steel
cooking grids.
Channel formed means rolled steel stamped into a U-shape; is not solid round rods.
Porcelain enameled, glossy finish. Sold as a set of three (3).
Part Number: 50193
Material: porcelain steel channels
Weight: 6.7
Dimensions:
- Front-To-Back: 16 13/16″
- Side-To_Side: 28 5/16″
Cast Iron
Cooking Grid.
Porcelain treated, matte finish. SOLD INDIVIDUALLY.
Part Number: CG-97P-CI
Material: cast iron
Weight: 4.65
Dimensions:
- Front-To-Back: 16 7/8″
- Side-To_Side: 9 5/16″
Cast Iron
Cooking Grids.
Porcelain treated, matte finish. SET OF THREE (3).
Part Number: CG-97P-CI-X3
Material: cast iron
Weight: 14.0
Dimensions:
- Front-To-Back: 16 7/8″
- Side-To_Side: 9 5/16″
463441412 (Rangemaster) Heat Tents
Stainless steel aftermarket vented Heat Tent.
- Stainless equivalent of part 98531
- Sold individually
- Made in USA

Part Number: 98531-SS
Material: stainless steel
Weight: 0.7
Dimensions:
- Front-To-Back: 14 5/8″
- Side-To_Side: 4 1/4″
$36.99
$24.90
Porcelain steel Heat Tent. Sold individually. Fits many Urban, Range Master, Kenmore, Thermos and Char-Broil Classic grills.
This part replaces original part numbers: 80008530, 80029725, G430-0005-W1.
Part Number: 98531
Material: porcelain steel
Weight: 0.6
Dimensions:
- Front-To-Back: 14 5/8″
- Side-To_Side: 4 1/4″
$38.35
$24.94
463441412 (Rangemaster) Igniter Components
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
Burner mounted electrode for use with 15591 and 15491 burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04430
Material: ceramic
Weight: 0.1
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB2-B
Weight: 0.3
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03320
Weight: 0.3
Burner mounted replacement electrode for use with burner 15641.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03351
Material: ceramic
Weight: 0.2
Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
463441412 (Rangemaster) Warming Racks
Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in any grill wide enough inside for the 24” rack.
- Far superior to the original porcelain coated steel rack
- Rests on your existing cooking grids.
- Solid 1/4” 304 stainless steel rods.
- Stands 3.75 inches tall.
- Made in USA
.
NOTE: Before ordering this universal rack, please verify your grill has enough space to accommodate it. What's required?
- Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
- Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside.
Part Number: CLA-WS0040
Material: stainless steel
Weight: 4.8
Dimensions:
- Front-To-Back: 6 1/4″
- Side-To_Side: 22 7/8″
463441412 (Rangemaster) Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 1 13/16” diameter
- Requires 3/8” mounting hole
Part Number: 00018
Weight: 0.1
Dimensions: 1 13/16” x 1 13/16”
463441412 (Rangemaster) Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
2 in 1 chrome plated turner / tong with PVC coated handle
Part Number: 40730
Material: chrome steel
Weight: 0.6
Dimensions: 14
Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.
Part Number: 42055
Weight: 0.2
Dimensions: 13
Porcelain Coated Round Topper.
11” diameter x 2.5” deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.
Part Number: 98130
Material: porcelain steel
Weight: 1.0
Dimensions: 11
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
|
Charbroil grill model 463441412. Some parts not specific to a grill brand or model like regulators, posts, and heat indicators, which are listed in our repair parts section. 02-Nov-26
|
We ship Charbroil BBQ parts worldwide
Back to Charbroil grill parts