Home > Charbroil Grill Models > Charbroil 463441512Char-Broil LP gas outdoor BBQ grill with side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Part diagrams and owners manuals for Charbroil model: 463441512
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement gas grill parts for Charbroil model: 463441512
463441512 Burners
Stainless steel burner for Charbroil model 463441512.
Replaces Charbroil factory part# G432-1700-W1
Part Number: 15491
Dimensions: 14 3/8” x 1”
Material: stainless steel
Weight: 0.9
$34.77
463441512 Burner Brackets and Carryovers
Burner crossover tube for Charbroil model 463441512.
Replaces Charbroil factory part# G413-0004-W2
Part Number: 05590
Dimensions: 7 1/4” x 0 3/4”
Material: stainless steel
Weight: 0.1
$14.09
463441512 Cooking Grids
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of three (3).
Part Number: 68763
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 27 15/16”
Material: matte cast iron
Weight: 13.0
$92.91
Channel formed U-shaped porcelain steel
cooking grids.
Channel formed means rolled steel stamped into a U-shape; is not solid round rods.
Porcelain enameled, glossy finish. Sold as a set of three (3).
Replaces Charbroil factory part# G432-1800-W1
Part Number: 50193
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 28 5/16”
Material: porcelain steel channels
Weight: 6.7
$81.64
463441512 Heat Tents
Stainless steel aftermarket vented Heat Tent.
- Stainless equivalent of part 98531
- Sold individually
- Made in USA
Part Number: 98531-SS
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.7
$23.47
Porcelain steel Heat Tent. Sold individually. Fits many Urban, Range Master, Kenmore, Thermos and Char-Broil Classic grills.
This part replaces original part numbers: 80008530, 80029725, G430-0005-W1.
Part Number: 98531
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: porcelain steel
Weight: 0.6
$35.00 $23.49
463441512 Igniter Components
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB2-B
Weight: 0.3
$31.52
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03320
Weight: 0.3
$27.78
Burner mounted replacement electrode for use with burner 15641.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03351
Material: ceramic
Weight: 0.2
$12.38
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
$16.46
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
Burner mounted electrode for use with 15591 and 15491 burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# G501-0010-W2
Part Number: 04430
Material: ceramic
Weight: 0.1
$12.47
463441512 Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 1 13/16” diameter
- Requires 3/8” mounting hole
Replaces Charbroil factory part# G431-0020-W2
Part Number: 00018
Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1
$15.11
463441512 Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59