Home > Charbroil Grill Models > Charbroil 463441513
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement grill parts to fit Charbroil model: 463441513
463441513 Burners
Stainless steel burner for Charbroil model 463441513.
Part Number: 15491
Material: stainless steel
Weight: 0.9
Dimensions: 14 3/8 x 1
463441513 Burner Brackets and Carryovers
Burner crossover tube for Charbroil model 463441513.
Part Number: 05590
Material: stainless steel
Weight: 0.1
Dimensions: 7 1/4 x 0 3/4
463441513 Cooking Grids
Channel formed U-shaped porcelain steel
cooking grids.
Channel formed means rolled steel stamped into a U-shape; is not solid round rods.
Porcelain enameled, glossy finish. Sold as a set of three (3).
Part Number: 50193
Material: porcelain steel channels
Weight: 6.7
Dimensions:
- Front-To-Back: 16 13/16″
- Side-To_Side: 28 5/16″
Cast Iron
Cooking Grid.
Porcelain treated, matte finish. SOLD INDIVIDUALLY.
Part Number: CG-97P-CI
Material: cast iron
Weight: 4.65
Dimensions:
- Front-To-Back: 16 7/8″
- Side-To_Side: 9 5/16″
Cast Iron
Cooking Grids.
Porcelain treated, matte finish. SET OF THREE (3).
Part Number: CG-97P-CI-X3
Material: cast iron
Weight: 14.0
Dimensions:
- Front-To-Back: 16 7/8″
- Side-To_Side: 9 5/16″
463441513 Heat Tents
Stainless steel aftermarket vented Heat Tent.
- Stainless equivalent of part 98531
- Sold individually
- Made in USA

Part Number: 98531-SS
Material: stainless steel
Weight: 0.7
Dimensions:
- Front-To-Back: 14 5/8″
- Side-To_Side: 4 1/4″
$36.99
$24.90
Porcelain steel Heat Tent. Sold individually. Fits many Urban, Range Master, Kenmore, Thermos and Char-Broil Classic grills.
This part replaces original part numbers: 80008530, 80029725, G430-0005-W1.
Part Number: 98531
Material: porcelain steel
Weight: 0.6
Dimensions:
- Front-To-Back: 14 5/8″
- Side-To_Side: 4 1/4″
$38.35
$24.94
463441513 Igniter Components
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
20 Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Weight: 0.05
Dimensions: 1/16
Electrode with 24.5 wire that has a female spade/flat end for Charbroil model 463441513. To lengthen the wire use adapter # 03198 and extension wire # 03750.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04432
Material: ceramic
Weight: 0.1
Dimensions: 4
Universal 2 5/8 adapter wire with female round and male
spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory
piezo spark generators have male
round connectors, while battery operated electronic spark generators usually have male
spade connectors.
- Can change male round to male spade
- Can change female spade to female round
ALL
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03198
Weight: 0.05
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4 or 13/16 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB2-B
Weight: 0.3
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03320
Weight: 0.3
Burner mounted replacement electrode for use with burner 15641.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03351
Material: ceramic
Weight: 0.2
Ignition connection wire used to connect battery powered spark generators to electrodes. One 46 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
463441513 Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 1 13/16 diameter
- Requires 3/8 mounting hole
Part Number: 00018
Weight: 0.1
Dimensions: 1 13/16 x 1 13/16
463441513 Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Material: stainless steel
Weight: 0.5
Dimensions: 8 1/4
Marinade Injector.For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.
Part Number: 14950
Material: stailess steel
Weight: 0.5
Deluxe non-stick flat spit basket. Attaches to 3/8 rotisserie rod with adjustable lid to secure food. 16x7.5x2
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Weight: 1.5
Dimensions: 7 1/2 x 16
GrillPro EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
This tank gauge will monitor your propane level, while you grill, and let's you know when you're running low on gas.
The magnetic tank gauge offers fast, accurate propane level monitoring for any size LP tank. The magnetic backing makes it easy to attach, remove, and reuse across multiple tanksperfect for grilling, camping, patio heaters, and more
Made in USA
Part Number: 00030
Weight: 0.1
|
Charbroil 463441513 - 02-Nov-26
|
We ship Charbroil BBQ parts worldwide
Back to Charbroil grill parts