Home > Charbroil Grill Models > Charbroil 463550605
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement grill parts for the Charbroil 463550605
463550605 Venturis
Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.
Part Number: SG-B
Material: stainless steel
Weight: 0.1
463550605 Cooking Grids
Genuine OEM porcelain steel
cooking grid.
Note: This is also a factory replacement for part SP124-3, which has been discontinued.
Part Number: SP124A-3
Material: porcelain steel
Weight: 2.36
Dimensions:
- Front-To-Back: 11 1/4″
- Side-To_Side: 19 7/8″
Chrome steel
cooking grid. Sold individually.
Replaces Charbroil factory part# 4156465
Part Number: 40101
Material: chrome steel wire
Weight: 2.4
Dimensions:
- Front-To-Back: 11 1/4″
- Side-To_Side: 19 1/2″
463550605 Rock Grates
carbon steel
rock grate for Charbroil model 463550605.
Part Number: 96501
Material: steel wire
Weight: 2.5
Dimensions:
- Front-To-Back: 8 5/16″
- Side-To_Side: 18″
463550605 Vaporiser Bar
Stainless steel VapoRiser Bar (V-Bar). Sold individually, number required varies. Made in USA

.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces Charbroil factory part# 4151037
Part Number: CLA-TS0037
Material: stainless steel
Weight: 1.2
Dimensions:
- Front-To-Back: 19 1/2″
- Side-To_Side: 4″
463550605 Igniter Components
Collector Box and electrode for Charbroil top ported TBBC & TLBBC burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-28B
Weight: 0.2
Genuine OEM 21” wire for side burner or other applications. One female
spade connector, one female
round connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T14
Weight: 0.05
Dimensions: 21
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
36” wire with two female
spade connectors for side burner igniters (not for use with rotary or
piezo ignitors).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03500
Weight: 0.05
Collector box and ceramic electrode with male
spade connector for models with 12112 or 11512 burners. Attaches directly to burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04420
Material: ceramic
Weight: 0.1
463550605 Warming Racks
Universal warming rack. For use on grills with at least 22” inside dimension.
Part Number: AP-6A
Material: Chrome steel
Weight: 1.3
Dimensions:
- Front-To-Back: 6″
- Side-To_Side: 21 1/2″
463550605 Accessories
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
Cast iron smoker box with six oblong venting holes. Fill with water-soaked wood chips and add smoke flavor to you food. Designed to release wood smoke.
- Works with both charcoal and gas grills.
- Easy to use and refill.
- Long lasting cast iron.
Part Number: 00150
Material: cast iron
Weight: 3.90
Dimensions: 5 1/4” x 8 3/8”
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA
.
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Material: stainless steel
Weight: 0.5
Dimensions: 8 1/4
Marinade Injector.For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.
Part Number: 14950
Material: stailess steel
Weight: 0.5
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Weight: 1.5
Dimensions: 7 1/2” x 16”
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
|
Charbroil grill model 463550605. Some parts not specific to a grill brand or model like regulators, posts, and heat indicators, which are listed in our repair parts section. 02-Nov-26
|
We ship Charbroil BBQ parts worldwide
Back to Charbroil grill parts