Home > Charbroil Grill Models > Charbroil 463831003
Char-Broil 2-Burner LP gas outdoor BBQ grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement grill parts for Charbroil model: 463831003
463831003 Venturis
Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.
Part Number: SG-B
Material: stainless steel
Weight: 0.1
463831003 Cooking Grids
Cooking grid solid premium grade 304 stainless steel with .225 diameter rods.
Replaces Charbroil factory part# 4152741
Part Number: CG-46SS
Material: stainless steel
Weight: 8.15
Dimensions:
- Front-To-Back: 14 3/4″
- Side-To_Side: 26 5/8″
463831003 Rock Grates
Rock grate for holding lava rock or ceramic briquettes for Charbroil model 463831003.
Part Number: BG-39
Material: carbon steel
Weight: 4.0
Dimensions:
- Front-To-Back: 11″
- Side-To_Side: 25″
463831003 Heat Plates
Stainless steel Flame Tamers. Sold individually, number required varies. Made in USA

.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces Charbroil factory part# 4500291
Part Number: CLA-TS0035
Material: stainless steel
Weight: 1.4
Dimensions:
- Front-To-Back: 25 7/8″
- Side-To_Side: 5 1/2″
463831003 Igniter Components
Universal 2 1/2” adaptor wire with a round female end and a male spade end.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-46B
Weight: 0.10
Dimensions: 2 1/2
Genuine OEM 21” wire for side burner or other applications. One female
spade connector, one female
round connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T14
Weight: 0.05
Dimensions: 21
Push-Button self-grounding
piezo spark generator. Color varies by manufacturer gray or black. Has round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. For more information, see our help center article
Ignition 101.
Replaces Charbroil factory part# 4153713
Part Number: 03100
Weight: 0.1
Collector box and ceramic electrode with male
spade connector for models with 12112 or 11512 burners. Attaches directly to burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# 5156119
Part Number: 04420
Material: ceramic
Weight: 0.1
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
36” wire with two female
spade connectors for side burner igniters (not for use with rotary or
piezo ignitors).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03500
Weight: 0.05
Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
463831003 Warming Racks
Chrome steel bottom warming rack for Charbroil 8000 series U-burner grills. Was used with top rack 06449 that is no longer available.
Warning:No longer made to work with upper warming rack. Does not have eyelet holes on right and left sides of warming rack to support the upper warming rack.
Replaces Charbroil factory part# 4152125
Part Number: 02125
Material: chrome steel wire
Weight: 1.14
Dimensions:
- Front-To-Back: 29 3/4″
- Side-To_Side: 10 1/2″
463831003 Accessories
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA
.
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
7” Bamboo BBQ Kabobs. Appetizer Server/Grilling Skewers - pack of 50. Limited to supplies on hand.
- Ideal for searving or grilling appetizers
- Wide end for easy handling
Part Number: 11040
Weight: 0.4
Dimensions: 7
High quality, long lasting ceramic briquettes. 90 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 90 briquettes will cover about 562 square inches. This is an area roughly 17” x 33”. For larger grills.
- Top quality product
- Each briquette measure 2” x 2”
- Self cleaning
- Great heat distibution, retains heat longer
- Can be used on all grills that use briquettes or lava rock
- Use a single layer (multiple layers can reduce temperatures)
NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.
- 59 briquetes covers an area apprimately 15” x 24”
- 70 briquetes covers an area apprimately 17” x 26”
- 90 briquetes covers an area apprimately 17” x 33”
Made in USA
Part Number: CLA-AC0405
Material: ceramic
Weight: 11.7
Dimensions: 2” x 2”
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Material: stainless steel
Weight: 0.14
Dimensions: 15
Stainless Steel Basting Set.
Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.
Part Number: 14913
Material: stailess steel
Weight: 0.5
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Weight: 1.1
Dimensions: 6 1/2” x 10”
Stuffed Burger Press
The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.
Part Number: 24795
Weight: .3
|
Charbroil 463831003 - 02-Nov-26
|
We ship Charbroil BBQ parts worldwide
Back to Charbroil grill parts