Home > Charbroil Grill Models > Charbroil 4639122
Char-Broil Quickset 9000 series LP gas grill with side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement gas grill parts for Charbroil model: 4639122 (Quickset)
4639122 (Quickset) Venturis
Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.
Part Number: SG-B
Material: stainless steel
Weight: 0.1
4639122 (Quickset) Rock Grates
Rock grate for holding lava rock or ceramic briquettes for Charbroil model 4639122.
Part Number: BG-39
Material: carbon steel
Weight: 4.0
Dimensions:
- Front-To-Back: 11″
- Side-To_Side: 25″
4639122 (Quickset) Vaporiser Bar
Stainless steel Vap-O-Riser protective burner shields for 9000 series grills for Charbroil model 4639122.
Replaces Charbroil factory part# 4156420
Part Number: VRB-9
Material: stainless steel
Weight: 1.4
Dimensions:
- Front-To-Back: 29 1/4″
- Side-To_Side: 4″
4639122 (Quickset) Igniter Components
Universal 2 1/2” adaptor wire with a round female end and a male spade end.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-46B
Weight: 0.10
Dimensions: 2 1/2
Genuine OEM 21” wire for side burner or other applications. One female
spade connector, one female
round connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T14
Weight: 0.05
Dimensions: 21
Collector box and ceramic electrode with male
spade connector for models with 12112 or 11512 burners. Attaches directly to burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# 4500208
Part Number: 04420
Material: ceramic
Weight: 0.1
Push-Button self-grounding
piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. Secondary connector is a flat male
spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part#
03620. For more information, see our article
Ignition 101.
Replaces Charbroil factory part# 4506710
Part Number: 03120
Weight: 0.1
Push-button, snap-in
piezo ignitor with external ground tab; requires 7/8” mounting hole. Ground may be used to connect for side burner applications or an additional burner electrode. Also attaching a ground wire to any metal location will improve the operation of the ignitor. See part#
03620 for grounding wire. For more information, see our article
Ignition 101.
Part Number: 03130
Weight: 0.1
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
36” wire with two female
spade connectors for side burner igniters (not for use with rotary or
piezo ignitors).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03500
Weight: 0.05
Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
4639122 (Quickset) Accessories
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA
.
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
Apple wood chips.
- All natural wood smoke flavor
- Great for use in BBQ's or smokers.
- 170 cubic inches (2 lbs. approx) in resealable bag
Try with portk, lamb, poultry, and fish.
Part Number: 00230
Weight: 2.0
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
Polished stainless steel turner with an ergonomic soft grip grey handle and red accents. Great for flipping burgers or turning delicate fish fillets.
Part Number: 43108
Material: stainless steel
Weight: 0.10
Dimensions: 16
Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.
Part Number: 42055
Weight: 0.2
Dimensions: 13
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
|
Charbroil model 4639122. If the BBQ grill part you are looking for is not listed above, make a note of the dimensions of your original part and try searching by part category. 02-Nov-26
|
We ship Charbroil BBQ parts worldwide
Back to Charbroil grill parts