Model: 4657702 (Masterflame 7000)

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 
   Home > Charbroil Grill Models > Charbroil 4657702

Char-Broil Masterflame 7000 series 2-burner LP gas grill



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.

Replacement grill parts to fit Charbroil model: 4657702 (Masterflame 7000)


 

4657702 (Masterflame 7000) Venturis

Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

$7.65








 

4657702 (Masterflame 7000) Cooking Grids

ONE PANEL. Genuine OEM cast iron cooking grid, single panel.

Part Number: 10225-T406
Material: Cast iron
Weight: 4.75
Dimensions:
  • Front-To-Back: 14 1/4″
  • Side-To_Side: 12 1/4″

$68.95






Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.
  • Made in USA
  • 304 commercial grade stainless steel
  • Solid .225 diameter stainless rods
  • Sold individually


Part Number: 55701-SS
Material: stainless steel
Weight: 5.0
Dimensions:
  • Front-To-Back: 14″
  • Side-To_Side: 24″

$83.82






Commercial grade 304 stainless steel cooking grid with 1/4” diameter rods. Made in USA .

Replaces Charbroil factory part# 4152739



Part Number: CG-45SS
Material: Stainless steel
Weight: 6.0
Dimensions:
  • Front-To-Back: 14″
  • Side-To_Side: 24″

$83.82








 

4657702 (Masterflame 7000) Vaporiser Bar

Stainless steel Vaporiser Bar (heat plate). Fits Charbroil MasterFlame series 7000 grills, others.

Replaces Charbroil factory part# 4156417



Part Number: 94171
Material: stainless steel
Weight: 0.6
Dimensions:
  • Front-To-Back: 23 7/16″
  • Side-To_Side: 2 1/2″

$22.63








 

4657702 (Masterflame 7000) Igniter Components

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-46B
Weight: 0.10
Dimensions: 2 1/2

$4.30






Genuine OEM 21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T14
Weight: 0.05
Dimensions: 21

$4.32






Push-Button self-grounding piezo spark generator. Color varies by manufacturer gray or black. Has round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. For more information, see our help center article Ignition 101.

Replaces Charbroil factory part# 4153713



Part Number: 03100
Weight: 0.1

$6.98






Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers 115C2, 12102, 11512, and 12112.
Includes:
  • Gas collector box
  • Ceramic electrode and connecting wire with male round connector
  • Mounting nuts and bolts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# 4153746



Part Number: 04400R
Weight: 0.3

$9.74






Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
    Includes:
  • Gas collector box
  • Ceramic electrode and wire
  • Mounting hardware

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# 4501758



Part Number: IG-11B
Weight: 0.3

$9.74






25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03400
Weight: 0.1

$5.31






Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610
Weight: 0.05

$8.29






14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03620
Weight: 0.1

$6.61








 

4657702 (Masterflame 7000) Warming Racks

Chrome steel bottom warming rack for Charbroil 7000 series U-burner grills for Charbroil model 4657702.

Replaces Charbroil factory part# 4152124



Part Number: 02124
Material: chrome steel wire
Weight: 1.10
Dimensions:
  • Front-To-Back: 23 1/2″
  • Side-To_Side: 10 1/2″

$30.53








 

4657702 (Masterflame 7000) Accessories

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

$14.71






Polished stainless steel turner with an ergonomic soft grip grey handle and red accents. Great for flipping burgers or turning delicate fish fillets.



Part Number: 43108
Material: stainless steel
Weight: 0.10
Dimensions: 16

$9.48






Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.



Part Number: 14950
Material: stailess steel
Weight: 0.5

$14.41






Porcelain Coated Square Wok Topper.
12” x 12” x 2” porcelain coated grilling wok with stainless steel handles and perforations. The single draw design improves functionality and rigidity, it also makes it much easier to clean.

Part Number: 98121
Material: porcelain steel
Weight: 1.6
Dimensions: 12” x 12”

$27.92






Stuffed Burger Press

The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.



Part Number: 24795
Weight: .3

$13.25







Charbroil 4657702 - 02-Nov-26



We ship Charbroil BBQ parts worldwide

Back to Charbroil grill parts


GRILLING  ACCESSORIES

Orders for Charbroil replacement grill parts of $79 and more get Free USA shipping (contiguous 48 states only)

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy