Model: 4658615 (Masterflame 9000)

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 
   Home > Charbroil Grill Models > Charbroil 4658615

Char-Broil Masterflame 9000 series 2-burner LP gas grill with side burner



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.

Replacement grill parts for Charbroil model: 4658615 (Masterflame 9000)


 

4658615 (Masterflame 9000) Venturis

two venturi gaskets with screws for Charbroil model 4658615.

Part Number: 00400
Weight: 0.05
Dimensions: 3 1/16” x 1 1/4”

$5.31






Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

$7.65








 

4658615 (Masterflame 9000) Cooking Grids

Cooking grid solid premium grade 304 stainless steel with .225 diameter rods.

Replaces Charbroil factory part# 4152778



Part Number: CG-46SS
Material: stainless steel
Weight: 8.15
Dimensions:
  • Front-To-Back: 14 3/4″
  • Side-To_Side: 26 5/8″

$89.58








 

4658615 (Masterflame 9000) Rock Grates

Rock grate for holding lava rock or ceramic briquettes for Charbroil model 4658615.

Part Number: BG-39
Material: carbon steel
Weight: 4.0
Dimensions:
  • Front-To-Back: 11″
  • Side-To_Side: 25″

$31.08








 

4658615 (Masterflame 9000) Vaporiser Bar

Stainless steel Vaporiser Bar (heat plate). Fits Charbroil MasterFlame series 8000 grills, others.

Replaces Charbroil factory part# 4156418



Part Number: 94181
Material: stainless steel
Weight: 1.3
Dimensions:
  • Front-To-Back: 26 1/4″
  • Side-To_Side: 4″

$33.26








 

4658615 (Masterflame 9000) Igniter Components

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-46B
Weight: 0.10
Dimensions: 2 1/2

$4.30






Genuine OEM 21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T14
Weight: 0.05
Dimensions: 21

$4.32






Push-Button self-grounding piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. Secondary connector is a flat male spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part# 03620. For more information, see our article Ignition 101.

Replaces Charbroil factory part# 4153714



Part Number: 03120
Weight: 0.1

$7.77






Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers 115C2, 12102, 11512, and 12112.
Includes:
  • Gas collector box
  • Ceramic electrode and connecting wire with male round connector
  • Mounting nuts and bolts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# 4153746



Part Number: 04400R
Weight: 0.3

$9.74






Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
    Includes:
  • Gas collector box
  • Ceramic electrode and wire
  • Mounting hardware

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# 4501758



Part Number: IG-11B
Weight: 0.3

$9.74






Push-button, snap-in piezo ignitor with external ground tab; requires 7/8” mounting hole. Ground may be used to connect for side burner applications or an additional burner electrode. Also attaching a ground wire to any metal location will improve the operation of the ignitor. See part# 03620 for grounding wire. For more information, see our article Ignition 101.

Part Number: 03130
Weight: 0.1

$8.81






25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03400
Weight: 0.1

$5.31






36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03500
Weight: 0.05

$5.42






Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610
Weight: 0.05

$8.29






14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03620
Weight: 0.1

$6.61






Collector box and ceramic electrode with male spade connector for models with 12112 or 11512 burners. Attaches directly to burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 04420
Material: ceramic
Weight: 0.1

$10.03








 

4658615 (Masterflame 9000) Warming Racks

Chrome steel bottom warming rack for Charbroil 8000 series U-burner grills. Was used with top rack 06449 that is no longer available.
Warning:No longer made to work with upper warming rack. Does not have eyelet holes on right and left sides of warming rack to support the upper warming rack.

Replaces Charbroil factory part# 4152125



Part Number: 02125
Material: chrome steel wire
Weight: 1.14
Dimensions:
  • Front-To-Back: 29 3/4″
  • Side-To_Side: 10 1/2″

$33.49








 

4658615 (Masterflame 9000) Accessories

BBQ'er choice porcelain grill briquets. The finest available.
  • Self-Cleaning Porcelain Briquettes.
  • Made of fired porcelain for even heat transfer.
  • Virtually indestructible.
  • About 56 pieces covers approximately 310 square inches.
  • Made in USA .
NOTE: MHP model TJK requires two (2) bags.

Part Number: BQ-3A
Weight: 4.2

$50.28






Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

$24.95






GrillPro ® grid lifter removes both cast and stainless cooking grids.

One set of tines to remove cast and another to remove stainless cooking grids.

Stainless tip, resin handle.



Part Number: 76745
Material: stainless
Weight: .2

$7.74






50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts 94751, 92571 and other simular trays.

Part Number: 41650
Material: ceramic
Weight: 7.2
Dimensions: 2” x 2”

$56.36






15” Stainless steel tong.
  • Soft comfort grip
  • Locking mechanism


Part Number: 40259
Material: stainless steel
Weight: 0.14
Dimensions: 15

$9.92






Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.



Part Number: 42055
Weight: 0.2
Dimensions: 13

$8.76






Porcelain Coated Round Topper.
11” diameter x 2.5” deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.

Part Number: 98130
Material: porcelain steel
Weight: 1.0
Dimensions: 11

$19.15






Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most



Part Number: 90963
Weight: 0.2

$19.30







Charbroil 4658615 - 02-Nov-26



We ship Charbroil BBQ parts worldwide

Back to Charbroil grill parts


GRILLING  ACCESSORIES

Replacement parts orders for Charbroil grills $79 and more shipped to the USA (contiguous 48 states only) Free of charge.

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy