Home > Charbroil Grill Models > Charbroil 4658725
Char-Broil Masterflame 8000 series 2-burner LP gas grill with side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement grill parts for the Charbroil 4658725 (Masterflame 8000)
4658725 (Masterflame 8000) Venturis
Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.
Part Number: SG-B
Material: stainless steel
Weight: 0.1
4658725 (Masterflame 8000) Cooking Grids
Cooking grid solid premium grade 304 stainless steel with .225 diameter rods.
Replaces Charbroil factory part# 4152741
Part Number: CG-46SS
Material: stainless steel
Weight: 8.15
Dimensions:
- Front-To-Back: 14 3/4″
- Side-To_Side: 26 5/8″
4658725 (Masterflame 8000) Vaporiser Bar
Stainless steel Vaporiser Bar (
heat plate). Fits Charbroil MasterFlame series 8000 grills, others.
Replaces Charbroil factory part# 4156418
Part Number: 94181
Material: stainless steel
Weight: 1.3
Dimensions:
- Front-To-Back: 26 1/4″
- Side-To_Side: 4″
4658725 (Masterflame 8000) Igniter Components
Universal 2 1/2” adaptor wire with a round female end and a male spade end.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-46B
Weight: 0.10
Dimensions: 2 1/2
Genuine OEM 21” wire for side burner or other applications. One female
spade connector, one female
round connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T14
Weight: 0.05
Dimensions: 21
Push-Button self-grounding
piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. Secondary connector is a flat male
spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part#
03620. For more information, see our article
Ignition 101.
Replaces Charbroil factory part# 4153714
Part Number: 03120
Weight: 0.1
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers 115C2, 12102, 11512, and 12112.
Includes:
- Gas collector box
- Ceramic electrode and connecting wire with male round connector
- Mounting nuts and bolts
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# 4153746
Part Number: 04400R
Weight: 0.3
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
Includes:- Gas collector box
- Ceramic electrode and wire
- Mounting hardware
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# 4501758
Part Number: IG-11B
Weight: 0.3
Push-button, snap-in
piezo ignitor with external ground tab; requires 7/8” mounting hole. Ground may be used to connect for side burner applications or an additional burner electrode. Also attaching a ground wire to any metal location will improve the operation of the ignitor. See part#
03620 for grounding wire. For more information, see our article
Ignition 101.
Part Number: 03130
Weight: 0.1
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
36” wire with two female
spade connectors for side burner igniters (not for use with rotary or
piezo ignitors).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03500
Weight: 0.05
Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
Collector box and ceramic electrode with male
spade connector for models with 12112 or 11512 burners. Attaches directly to burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04420
Material: ceramic
Weight: 0.1
4658725 (Masterflame 8000) Warming Racks
Chrome steel bottom warming rack for Charbroil 8000 series U-burner grills. Was used with top rack 06449 that is no longer available.
Warning:No longer made to work with upper warming rack. Does not have eyelet holes on right and left sides of warming rack to support the upper warming rack.
Replaces Charbroil factory part# 4152125
Part Number: 02125
Material: chrome steel wire
Weight: 1.14
Dimensions:
- Front-To-Back: 29 3/4″
- Side-To_Side: 10 1/2″
4658725 (Masterflame 8000) Accessories
Cast iron smoker box with six oblong venting holes. Fill with water-soaked wood chips and add smoke flavor to you food. Designed to release wood smoke.
- Works with both charcoal and gas grills.
- Easy to use and refill.
- Long lasting cast iron.
Part Number: 00150
Material: cast iron
Weight: 3.90
Dimensions: 5 1/4” x 8 3/8”
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Material: stainless steel
Weight: 0.5
Dimensions: 8 1/4
Marinade Injector.For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.
Part Number: 14950
Material: stailess steel
Weight: 0.5
Rib & Roast Rack. Reversible rib rack and roast support. Made of stainless steel with a frame that holds 6 racks of ribs and a roast support for large cuts of meat.
Part Number: 41616
Material: stainless steel
Weight: 0.5
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
|
Charbroil grill model 4658725. Some parts not specific to a grill brand or model like regulators, posts, and heat indicators, which are listed in our repair parts section. 02-Nov-26
|
We ship Charbroil BBQ parts worldwide
Back to Charbroil grill parts