Charbroil 466268008 (Commercial) | Parts

Home > Charbroil Grill Models > Charbroil 466268008

Char-Broil Commercial Series 4-Burner LP gas grill with side burner

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.

Part diagrams and owners manuals for Charbroil model: 466268008 (Commercial)

Click small image to enlarge. Click Large image to reduce.
Double click for new window

Grill image for model: 466268008 (Commercial)

Exploded parts diagram for model: 466268008 (Commercial)

Replacement gas grill parts for Charbroil model: 466268008 (Commercial)

466268008 (Commercial) Burners

Stainless steel burner. Includes screw in venturi for adjusting air flow.

Replaces Charbroil factory part# 80013421

Part Number: 15591
Dimensions: 15 7/8” x 1”
Material: stainless steel
Weight: 0.8

stainless steel burner for Charbroil model 466268008

$34.77

All Charbroil Burners

466268008 (Commercial) Burner Brackets and Carryovers

stainless steel cross-over burner for Charbroil model 466268008.

Replaces Charbroil factory part# 80005592

Part Number: 05592
Dimensions: 6 3/8” x 0 13/16”
Material: stainless steel
Weight: 0.1

$14.85

All Charbroil Burner Brackets and Carryovers

466268008 (Commercial) Cooking Grids

Stainless Steel cooking grids. SET OF TWO (2) panels.

Made in USA
Solid 5/16” 304 stainless rods
Each panel measures 18 1/2” x 12 3/4”
Overall dimensions: 18 1/2” x 25 1/2”

Part Number: CG-109SS-X2
Dimension Front-to-Back: 18 1/2”
Dimension Side-to-Side: 25 1/2”
Weight: 15.0

$204.95

Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.

Made in USA
Commercial grade 304 stainless steel
5/16” solid stainless rods
Sold as a set of two (2).

Each panel measures:

Front-to-Back: 18 1/2”
Side-to-Side: 12 3/4”

Total Side-to-Side: 25 1/2”

Part Number: 54712-SS-X2
Dimension Front-to-Back: 18 1/2”
Dimension Side-to-Side: 25 1/2”
Weight: 5.0

$204.95

Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.

Made in USA
304 commercial grade stainless steel
Solid 5/16” diameter solid stainless rods
Sold individually

Fits grills made by Charbroil, Kenmore, Master Chef and others.

Part Number: 54712-SS
Dimension Front-to-Back: 18 1/2”
Dimension Side-to-Side: 12 3/4”
Weight: 2.5

$104.85

Reversible, heavy cast iron cooking grids. Porcelain treated, flat matte finish. SOLD INDIVIDUALLY

Part Number: 66652-1PC
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 13 1/8”
Material: matte cast iron
Weight: 10.0

$119.95

$63.28

Premium universal cooking grids. Set of two (2) grids. Porcelain treated cast iron. Matte finish.

Each panel measures:

Front-to-Back: 18 1/4”
Side-to-Side: 13 1/8”

Total Side-to-Side: 26 1/4”

Part Number: 66652-UNI-X2
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 26 1/4”
Material: cast iron
Weight: 18.8

$111.52

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 66652-UNI-X2 for a set of two (2) grids.

Part Number: 66652-UNI
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 13 1/8”
Material: cast iron
Weight: 9.4

$61.91

Reversible, heavy cast iron cooking grids. Porcelain treated, flat matte finish. Sold as a set of two (2).

Replaces Charbroil factory part# 80065455

Part Number: 66652
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 26 1/4”
Material: matte cast iron
Weight: 19.35

$168.70

$119.99

All Charbroil Cooking Grids

466268008 (Commercial) Heat Plates

SET OF FOUR/4 PACK Flame Tamer, stainless steel. Made in USA

.

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0141-X4
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 3.92

$56.88

Flame Tamer, stainless steel. Made in USA

.

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0141
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.98

$21.87

All Charbroil Heat Plates

466268008 (Commercial) Flame Tamers

Stainless steel aftermarket Flame Tamer heat plate.

Stainless equivalent of part 93321
Superior to the porcelain steel originals
Rust and corrosion restitant
Sold individually
Made in USA

Part Number: 93321-SS
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.7

$21.87

Porcelain steel Flame Tamer. Sold individually.

Replaces Charbroil factory part# 80003332

Part Number: 93321
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 1.0

$25.40

$20.90

All Charbroil Flame Tamers

466268008 (Commercial) Igniter Components

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

Wire has female spade connector on one end and square plastic connector on the other
Square plastice connector attaches to spark generator
Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

$8.67

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

$6.58

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

$18.48

Burner mounted electrode for use with 15591 and 15491 burners.

39” wire with female spade connector
Includes adapter wire part 03198 for applications needing male spade connector on electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04430
Material: ceramic
Weight: 0.1

$12.47

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$7.10

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# 80008194

Part Number: IGEIB4-B
Weight: 0.3

$31.52

Universal four-outlet battery powered push button ignitor.

1.5 volt
Has four (4) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# 80008194

Part Number: 03340
Weight: 0.5

$31.50

All Charbroil Igniter Components

466268008 (Commercial) Heat indicators and Meat Thermometers

Semi-circular, snap in heat indicator with 2 3/4” heat prob for Charbroil model 466268008.

Replaces Charbroil factory part# 80006666

Part Number: 00473
Dimensions: 1 3/4” x 1 3/16”
Material: stainless steel
Weight: 0.1

$14.09

All Charbroil Heat indicators and Meat Thermometers

466268008 (Commercial) Accessories

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

$22.60

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

$16.16

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

$14.41

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

$27.83

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

$7.60

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, April 4, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.