Home > Charbroil Grill Models > Charbroil 4685602
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement gas grill parts for Charbroil model: 4685602
4685602 Venturis
Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.
Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1
$12.82
two venturi gaskets with screws for Charbroil model 4685602.
Part Number: 00400
Dimensions: 3 1/16” x 1 1/4”
Weight: 0.05
$4.65
4685602 Cooking Grids
Chrome steel
cooking grid. Sold individually.
Part Number: 40101
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 19 1/2”
Material: chrome steel wire
Weight: 2.4
$28.17
Genuine OEM porcelain steel
cooking grid.
Note: This is also a factory replacement for part SP124-3, which has been discontinued.
Part Number: SP124A-3
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 19 7/8”
Material: porcelain steel
Weight: 2.36
$43.73
4685602 Rock Grates
carbon steel
rock grate for Charbroil model 4685602.
Part Number: 96501
Dimensions: 8 5/16” x 18”
Material: steel wire
Weight: 2.5
$24.87
4685602 Vaporiser Bar
Stainless steel Vap-O-Riser protective burner shields for 5000 series grills for Charbroil model 4685602.
Part Number: VRB-5
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: ”
Material: stainless steel
Weight: 0.45
$14.76
4685602 Igniter Components
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
$5.35
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers 115C2, 12102, 11512, and 12112.
Includes:
- Gas collector box
- Ceramic electrode and connecting wire with male round connector
- Mounting nuts and bolts
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04400R
Weight: 0.3
$9.34
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
Includes:- Gas collector box
- Ceramic electrode and wire
- Mounting hardware
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-11B
Weight: 0.3
$9.34
4685602 Warming Racks
Universal warming rack. For use on grills with at least 22” inside dimension.
Part Number: AP-6A
Dimensions: 6” x 21 1/2”
Material: Chrome steel
Weight: 1.3
$17.36
4685602 Accessories
Durable 2 5/16” round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$22.17
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$22.17
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73