Charbroil GG5023-1

Stainless steel burner and venturi assembly for Charbroil model GG5023-1.

Part Number: 11612-76302
Dimensions: 16 7/8” x 2 1/4”
Material: stainless steel
Weight: 3.0

Stainless steel burner for Charbroil model GG5023-1.

Part Number: 11612
Dimensions: 16 7/8” x 2 1/4”
Material: stainless steel
Weight: 1.4

L-shaped venturi pair. Includes all necessary gaskets and screws/nuts.

Part Number: 76302
Dimensions: 4 5/8” x 1 1/2”
Material: zinc plated steel
Weight: 0.6

Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.

Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1

two venturi gaskets with screws for Charbroil model GG5023-1.

Part Number: 00400
Dimensions: 3 1/16” x 1 1/4”
Weight: 0.05

Chrome steel cooking grid. Sold individually.

Part Number: 40101
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 19 1/2”
Material: chrome steel wire
Weight: 2.4

Genuine OEM porcelain steel cooking grid.

• Porcelain enameled, glossy finish.
• Sold individually.
• Fits 240 series grills, others

Note: This is also a factory replacement for part SP124-3, which has been discontinued.

Part Number: SP124A-3
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 19 7/8”
Material: porcelain steel
Weight: 2.36

carbon steel rock grate for Charbroil model GG5023-1.

Part Number: 96501
Dimensions: 8 5/16” x 18”
Material: steel wire
Weight: 2.5

Stainless steel Vap-O-Riser protective burner shields for 5000 series grills for Charbroil model GG5023-1.

Part Number: VRB-5
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: ”
Material: stainless steel
Weight: 0.45

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03400
Weight: 0.1

Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers 115C2, 12102, 11512, and 12112.
Includes:

• Gas collector box
• Ceramic electrode and connecting wire with male round connector
• Mounting nuts and bolts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04400R
Weight: 0.3

Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.

Includes:
• Gas collector box
• Ceramic electrode and wire
• Mounting hardware

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-11B
Weight: 0.3

Durable 2 5/16” round briquettes

• Self-cleaning
• Control flare-ups while holding an even heat pattern.
• About 53 pieces, covers approximately 275 sq. inches.
• Fits all gas grills

Part Number: BQ-5
Weight: 7.2

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

10” Bamboo Skewers (100 pieces)

• Ideal for grilling meat and vegetables
• Soak skewers in water about 1/2 hour before using
• Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
• Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.

Part Number: 11060
Weight: 0.6

Ceramic briquettes 48 pieces. Fits briquette trays 94751, 92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".

Part Number: 41648
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.5

Deluxe 17” stainless steel turner.

• Soft comfort rubber grip
• Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7