Home > Coleman Grill Models > Coleman G53206
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Coleman grill.
Replacement BBQ grill parts for Coleman model: G53206
G53206 Burners
stainless steel burner for Coleman model G53206.
Part Number: 14771
Dimensions: 16 11/16 x 1
Material: stainless steel
Weight: 0.6
$47.05
G53206 Burner Brackets and Carryovers
stainless steel cross-over for Coleman model G53206.
Part Number: 05301
Dimensions: 8 5/8 x 0 7/8
Material: stainless steel
Weight: 0.2
$12.06
G53206 Cooking Grids
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of three (3).
Part Number: 65253
Dimension Front-to-Back: 18 3/8
Dimension Side-to-Side: 26 7/16
Material: matte cast iron
Weight: 16.5
$98.96
G53206 Flame Tamers
Porcelain steel Flame Tamer. Sold individually.
Part Number: 97371
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: porcelain steel
Weight: 0.55
$21.54
SET OF THREE/3 PACK Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 2.16
$48.77
SET OF FOUR/4 PACK Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 2.88
$62.52
Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 0.72
$17.61
Porcelain steel Flame Tamers. SET OF SIX.
Part Number: 97371-6X
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: porcelain steel
Weight: 3.3
Image not available
$105.36
G53206 Igniter Components
Electrode, gas collector box, and wire. The connecting wire has a flat female
spade connector, which is typically used with electronic (battery operated) ignitors (see
Ignition 101 in our help center).
NOTE: This electrode is also sometimes used with push-button or rotary
piezo ignitors, such as our part#
03100 and
03120, which have
round connectors. When connecting 01472 electrode to ignitors with
round connectors, use short wire part#
03199C to convert the electrode wire from a femal
spade connector to a female
round connector.
Part Number: 01472
Material: ceramic
Weight: 0.1
$10.87
round trigger switch for AA and AAA spark generators; use original wires
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03153
Dimensions: 17 3/4 x 1
Weight: 0.1
$18.33
Universal 2 3/4 adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
2-outlet AA spark generator
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03372
Weight: 0.5
$67.78
G53206 Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 3 1/8 diameter
- Requires .60 mounting hole
WARNING: Please remove your old heat indicator and inspect how it is fitted onto the hood of your grill. This heat indicator has a .44 thread length; a wing nut is included. The overall length of the probe from the base of the back-side to the end of the probe measures 1 1/2".
Part Number: 00020
Dimensions: 3 1/8 x 3 1/8
Weight: .20
$19.15
G53206 Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10 x 13 3/4.
Part Number: 41338
Weight: 1.1
$22.60
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Deluxe venturi brush with 11 coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31