Cook-On SKU-167900 (Complete Kitchen)

Cast iron burner for Cook-On model SKU-167900.

Part Number: 23301
Dimensions: 15 3/4” x 2 7/8”
Material: cast iron
Weight: 3.9

Cast stainless steel burner. Tired of changing out rusted cast iron burners? Far superior to the cast iron and brass versions, this burner will probably outlast your grill. Designed to replace cast iron and brass burners of same design.

NOTE: This burner is equiped with an air intake adjustable control shutter (not shown in photos) and with an air intake control screw for regulating the air/gas mixture into the burner. Natural gas applications require more air (more open screw) than lquid propane (LP). If necessary, adjust screw to get a yellow-tipped blue flame.

Part Number: 23301-CSS
Dimensions: 16” x 2 7/16”
Material: cast stainless steel
Weight: 3.2

Cast iron cooking grids (set of 3). Porcelain enameled, glossy finish.

Part Number: 65223
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 31 1/8”
Material: gloss cast iron
Weight: 22.0

Cast iron cooking grids. SET OF TWO (2) panels.

• Porcelain treated, matte finish
• Each panel measures 19 1/8” x 7 5/8”
• Total width: 15 1/4”

Part Number: CG-60P-CI-X2
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 15 1/4”
Material: cast iron
Weight: 11.3

Cast iron cooking grid. Porcelain treated, matte finish. Sold individually, number required varies by grill model

Part Number: CG-60P-CI
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 7 5/8”
Material: cast iron
Weight: 5.65

Premium quality heavy duty stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 6 pounds of solid stainless each.

• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Dimensions: 19 1/4” x 10 1/4”
• Made in USA .
• Sold individually.

See part CLA-GS0005-X3 for a more economical 3-pack.

Part Number: CLA-GS0005
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 10 1/4”
Material: stainless steel
Weight: 6.3

Premium universal cooking grids. Set of two (2) grids. Porcelain treated cast iron. Matte finish.

Each panel measures:

• Front-to-Back: 19 1/8”
• Side-to-Side: 7 5/8”

Total Side-to-Side: 15 1/4”

Part Number: 63182-UNI-X2
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 15 1/4”
Material: cast iron
Weight: 11.3

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 63182-UNI-X2 for a set of two (2).

Part Number: 63182-UNI
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 7 5/8”
Material: cast iron
Weight: 5.65

Premium universal cooking grids. Set of three (3). Porcelain treated cast iron. Matte finish.

Each panel measures:

• Front-to-Back: 19 1/4”
• Side-to-Side: 10 3/8”

Total Side-to-Side: 31 1/8”

Part Number: 65223-UNI-X3
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 31 1/8”
Material: cast iron
Weight: 21.3

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 65233-UNI-X3 for a set of three (3).

Part Number: 65223-UNI
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 10 3/8”
Material: cast iron
Weight: 7.10

Stainless steel heat plate/briquette rack. Includes 16 briquettes.

Part Number: 94751
Dimensions: 16 1/2” x 6 1/2”
Material: stainless steel
Weight: 4.1

Porcelain steel Flame Tamer / Heat Tent. Sold individually.

Part Number: 95131
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 6 1/4”
Material: porcelain steel
Weight: 2.4

Stainless steel aftermarket Flame Tamer / Heat Tent.

• Stainless equivalent of part 95131
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 95131-SS
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 1.5

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

Universal four-outlet battery powered push button ignitor.

• 1.5 volt
• Has four (4) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

Ceramic briquettes for Lynx and Dynasty Grills with 28 briquettes per box.

Part Number: BQLYX
Dimensions: 2” x 2”
Material: ceramic
Weight: 4.0

Ceramic briquettes 48 pieces. Fits briquette trays 94751, 92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".

Part Number: 41648
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.5

50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts 94751, 92571 and other simular trays.

Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts 94751, 92571 and other simular trays.

Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3