Model: 463230703

Cast iron burner for Costco model 463230703.

Replaces Costco factory part# 80000023

Part Number: CIDCH
Material: cast iron
Weight: 3.0
Dimensions: 13 13/16” x 2 1/4”

Main burner support bar bracket and gas carryover tubes. Made in USA . A universal bracket designed by Charbroil to replace a number of burner suppport brackets that are no longer available. Adjustable mounting hardware allows part to fit different width Charbroil-made grills.

• Instructions and bracket assembly hardware included
• Mounting screws for attaching to grill not supplied.
• Adjustable form 25” to 27 1/2”.

Replaces part numbers 80012481, 80002930, 80002950, 80000683 and G40803000000

Part Number: CLA-MX0034
Material: carbon steel
Weight: 1.1
Dimensions: 27 1/2

Heavy duty stainless steel cooking grid.

• 304 commercial grade stainless
• Solid 5/16” stainless rods
• Sold individually
• Made in USA .

Part Number: CLA52932S
Material: solid 304 stainless steel rod
Weight: 6.4
Dimensions:

• Front-To-Back: 16 5/8″
• Side-To_Side: 12 1/4″

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0143-X3
Material: stainless steel
Weight: 2.4
Dimensions:

• Front-To-Back: 15″
• Side-To_Side: 4 3/16″

Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Replaces Costco factory part# G40100290000

Part Number: CLA-TS0143
Material: stainless steel
Weight: 0.8
Dimensions:

• Front-To-Back: 15″
• Side-To_Side: 4 3/16″

Stainless steel heat plate/Flame Tamer for Costco model 463230703.

Replaces Costco factory part# G40100290000

Part Number: CBHP4
Material: stainless steel
Weight: 0.7
Dimensions:

• Front-To-Back: 15 1/16″
• Side-To_Side: 4 5/16″

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Weight: 0.1
Dimensions: 46

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Costco factory part# G40100839000

Part Number: IGEIB4-B
Weight: 0.3

Universal four-outlet battery powered push button ignitor.

• 1.5 volt
• Has four (4) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Costco factory part# G40100839000

Part Number: 03340
Weight: 0.5

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Material: stainless steel
Weight: 0.5
Dimensions: 8 1/4

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Weight: 0.2
Dimensions: 13

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Material: stainless steel
Weight: 1.6
Dimensions: 12 3/4” x 12 3/4”

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2