Home > Costco Grill Models > Costco SGR30MLPTuscany 30" 4-Burner LP gas grill, Lowe's item#
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Costco grill.
Replacement BBQ grill parts for Costco model: SGR30MLP
SGR30MLP Burners
Three (3) tube stainless steel burner assembly. Includes pair of ceramic electrodes and mounting hardware (part# 01683).
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive Jan 2024.
Part Number: 13033
Dimensions: 18” x 15 3/4”
Material: stainless steel
Weight: 2.3
$79.92
304 Stainless steel Infrared rear rotisserie burner with ceramic wafer. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part#
CLA-VB0245 for LP, or part#
CLA-VB0246 for natural gas applications.
Dimensions:
- Maximum overall length, including mounting tab on one end: 17”
- Maximum width: 3 3/8”
- Burner box 15 3/8” x 3 3/8”
- Mounting holes: 16 1/8” on center
Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0
$118.70
SGR30MLP Burner Brackets and Carryovers
4-Burner support and carry-over bracket. Made in USA
.
Part Number: CLA-MS0265
Dimensions: 26”
Material: stainless steel
Weight: 0.75
$44.80
SGR30MLP Cooking Grids
Stainless steel
cooking grids with solid 1/4” rods (set of 3) for Costco model SGR30MLP.
Part Number: 53S33
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 27 3/8”
Material: stainless steel wire
Weight: 10.0
$185.71
SGR30MLP Flavor Grids
Porcelain steel Flavor Grid. Sold individually, number required varies by grill.
Part Number: 93031
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: porcelain steel
Weight: 1.1
$27.56
Large Flavor Grid. Stainless steel. Only one of these are used on the grill. This part has an extended side that faces the infrared burner and acts as a heat shield. The other Flavor Grids do not have this shield.
- One required per grill.
- Sold individually.
- Made in USA .
NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use. Made in USA
Part Number: CLA-TS0072
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 1.2
$31.72
Flavor grid, stainless steel. Made in USA
.
NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0140
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.98
$28.91
SGR30MLP Igniter Components
Ceramic electrode with mounting hardware.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 01683
Material: ceramic
Weight: 0.1
$12.47
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
Genuine OEM 21” wire for side burner or other applications. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T12
Dimensions: 21
Weight: 0.05
$4.21
SGR30MLP Valves, Orifices, and Manifolds
#63 orifice for infrared burner CLA-BL0229; use on liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.
Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3
$24.42
#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.
Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3
Image not available
$22.60
SGR30MLP Miscellaneous Repair Parts
Stainless steel electrode shield. Made in USA
Part Number: CLA-MS0091
Dimensions: 14 1/8” x 3 3/8”
Material: stainless steel
Weight: 0.4
$20.27
SGR30MLP Accessories
HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.
Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0
$20.09
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60