Home > Cuisinart Grill Models > Cuisinart 85-3079-4
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Cuisinart grill.
Replacement grill parts to fit Cuisinart model: 85-3079-4
85-3079-4 Burners
Stainless steel burner for Cuisinart model 85-3079-4.
Part Number: 10291
Dimensions: 15 1/4” x 1”
Material: stainless steel
Weight: 0.7
$33.45
85-3079-4 Burner Brackets and Carryovers
Burner crossover tube for Cuisinart model 85-3079-4.
Part Number: 05590
Dimensions: 7 1/4” x 0 3/4”
Material: stainless steel
Weight: 0.1
$14.09
85-3079-4 Cooking Grids
Stainless steel
cooking grids. Sold as a set of two (2).
Part Number: 529S2
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 21 3/16”
Material: stainless steel tubes
Weight: 6.14
$78.11
85-3079-4 Flame Tamers
Porcelain steel Flame Tamer. Sold individually.
Part Number: 90291
Dimension Front-to-Back: 16 5/16”
Dimension Side-to-Side: 4 5/8”
Material: porcelain steel
Weight: 1.0
$21.54
85-3079-4 Igniter Components
Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1
$19.80
round trigger switch for AA and AAA spark generators; use original wires
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03153
Dimensions: 17 3/4” x 1”
Weight: 0.1
$18.33
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has four(4) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03344
Dimensions: 2” x 2 1/2”
Weight: 0.5
$37.92
Burner mounted electrode for use with 15591 and 15491 burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04430
Material: ceramic
Weight: 0.1
$12.47
85-3079-4 Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 3 1/8” diameter
- Requires .60” mounting hole
WARNING: Please remove your old heat indicator and inspect how it is fitted onto the hood of your grill. This heat indicator has a .44” thread length; a wing nut is included. The overall length of the probe from the base of the back-side to the end of the probe measures 1 1/2".
Part Number: 00020
Dimensions: 3 1/8” x 3 1/8”
Weight: .20
$19.15
85-3079-4 Accessories
HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.
Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0
$20.09
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6
$22.70
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60