Home > Cuisinart Grill Models > Cuisinart C560S
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Cuisinart grill.
Replacement grill parts for Cuisinart model: C560S
C560S Burners
Stainless steel burner for Cuisinart model C560S.
Part Number: 10291
Dimensions: 15 1/4” x 1”
Material: stainless steel
Weight: 0.7
$33.45
C560S Burner Brackets and Carryovers
Burner crossover tube for Cuisinart model C560S.
Part Number: 05590
Dimensions: 7 1/4” x 0 3/4”
Material: stainless steel
Weight: 0.1
$14.09
C560S Cooking Grids
Stainless steel
cooking grids. Sold as a set of two (2).
Part Number: 529S2
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 21 3/16”
Material: stainless steel tubes
Weight: 6.14
$78.11
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Part Number: 60152
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 21 5/8”
Material: matte cast iron
Weight: 12.11
$85.93
C560S Flame Tamers
Porcelain steel Flame Tamer. Sold individually.
Part Number: 90291
Dimension Front-to-Back: 16 5/16”
Dimension Side-to-Side: 4 5/8”
Material: porcelain steel
Weight: 1.0
$21.54
C560S Igniter Components
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB4-B
Weight: 0.3
$31.52
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
$31.50
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
$18.48
Burner mounted electrode for use with 15591 and 15491 burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04430
Material: ceramic
Weight: 0.1
$12.47
C560S Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 3 1/8” diameter
- Requires .60” mounting hole
WARNING: Please remove your old heat indicator and inspect how it is fitted onto the hood of your grill. This heat indicator has a .44” thread length; a wing nut is included. The overall length of the probe from the base of the back-side to the end of the probe measures 1 1/2".
Part Number: 00020
Dimensions: 3 1/8” x 3 1/8”
Weight: .20
$19.15
Round heat indicator.
- Single probe
- 3” diameter
- Requires 3/8” mounting hole
Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2
$15.11
C560S Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60