Home > Cuisinart Grill Models > Cuisinart C782SR
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Cuisinart grill. This is best done with the old parts out of the grill. Verify your Cuisinart grill model number.
Replacement gas grill parts for Cuisinart model: C782SR
C782SR Burners
Stainless steel burner for Cuisinart model C782SR.
Part Number: 1L171
Material: stainless steel
Weight: 0.9
Dimensions: 15 5/8” x 4 3/8”
Stainless steel burner for Cuisinart model C782SR.
Part Number: 1R191
Material: stainless steel
Weight: 0.9
Dimensions: 15 5/8” x 4 3/8”
C782SR Cooking Grids
Premium universal cooking grids. Set of three (3). Porcelain treated cast iron. Matte finish.
Each panel measures:- Front-to-Back: 18 3/4”
- Side-to-Side: 9 1/2”
Total Side-to-Side: 28 1/2”
Part Number: 60083-UNI-X3
Material: cast iron
Weight: 19.35
Dimensions:
- Front-To-Back: 18 3/4″
- Side-To_Side: 28 1/2″
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 60083-UNI-X3 for a set of three (3).
Part Number: 60083-UNI
Material: cast iron
Weight: 6.45
Dimensions:
- Front-To-Back: 18 3/4″
- Side-To_Side: 9 1/2″
Cast iron
cooking grid.
Porcelain treated, matte finish. Sold individually, number required varies by grill model.
Part Number: CG-72P-CI
Material: cast iron
Weight: 6.45
Dimensions:
- Front-To-Back: 18 3/4″
- Side-To_Side: 9 1/2″
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of three (3).
Part Number: 60083
Material: gloss cast iron
Weight: 17.0
Dimensions:
- Front-To-Back: 18 3/4″
- Side-To_Side: 28 1/2″
C782SR Flame Tamers
Porcelain steel Flame Tamer. Sold individually.
Part Number: 91911
Material: porcelain steel
Weight: 1.4
Dimensions:
- Front-To-Back: 16″
- Side-To_Side: 5 15/16″
C782SR Igniter Components
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
Burner-mounted electrode and 10.5” wire with female
spade connector for Cuisinart model C782SR. If electrode wire needs to be longer, see adapter wire part # 03198 and connector wire part # 03750.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 00170
Material: ceramic
Weight: 0.1
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB4-B
Weight: 0.3
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
C782SR Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Stainless Steel Basting Set.
Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.
Part Number: 14913
Material: stailess steel
Weight: 0.5
Porcelain Coated Grill Topper.
11” x 16” Single draw construction for improved rigidity. Stainless steel handles and raised contours for improved functionality.
Part Number: 97122
Material: porcelain steel
Weight: 1.10
Dimensions: 16” x 11 1/2”
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
|
Cuisinart model C782SR. If the BBQ grill part you are looking for is not listed above, make a note
of the dimensions of your original part and try searching by part category. Oct 15 2025
|
We ship BBQ grill parts for Cuisinart gas grills worldwide
Back to Cuisinart grill parts
USA shipping (contiguous 48 states only) on all Cuisinart part orders $49 and more