Home > Cuisinart Grill Models > Cuisinart C790SR
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Cuisinart grill. This is best done with the old parts out of the grill. Verify your Cuisinart grill model number.
Replacement grill parts for the Cuisinart C790SR
C790SR Burners
Stainless steel burner for Cuisinart model C790SR.
Part Number: 1L171
Material: stainless steel
Weight: 0.9
Dimensions: 15 5/8” x 4 3/8”
Stainless steel burner for Cuisinart model C790SR.
Part Number: 1R191
Material: stainless steel
Weight: 0.9
Dimensions: 15 5/8” x 4 3/8”
C790SR Cooking Grids
Premium universal cooking grids. Set of three (3). Porcelain treated cast iron. Matte finish.
Each panel measures:- Front-to-Back: 18 3/4”
- Side-to-Side: 9 1/2”
Total Side-to-Side: 28 1/2”
Part Number: 60083-UNI-X3
Material: cast iron
Weight: 19.35
Dimensions:
- Front-To-Back: 18 3/4″
- Side-To_Side: 28 1/2″
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 60083-UNI-X3 for a set of three (3).
Part Number: 60083-UNI
Material: cast iron
Weight: 6.45
Dimensions:
- Front-To-Back: 18 3/4″
- Side-To_Side: 9 1/2″
Cast iron
cooking grid.
Porcelain treated, matte finish. Sold individually, number required varies by grill model.
Part Number: CG-72P-CI
Material: cast iron
Weight: 6.45
Dimensions:
- Front-To-Back: 18 3/4″
- Side-To_Side: 9 1/2″
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of three (3).
Part Number: 60083
Material: gloss cast iron
Weight: 17.0
Dimensions:
- Front-To-Back: 18 3/4″
- Side-To_Side: 28 1/2″
C790SR Flame Tamers
Porcelain steel Flame Tamer. Sold individually.
Part Number: 91911
Material: porcelain steel
Weight: 1.4
Dimensions:
- Front-To-Back: 16″
- Side-To_Side: 5 15/16″
C790SR Igniter Components
Burner-mounted electrode and 10.5” wire with female
spade connector for Cuisinart model C790SR. If electrode wire needs to be longer, see adapter wire part # 03198 and connector wire part # 03750.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 00170
Material: ceramic
Weight: 0.1
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380
Weight: 0.7
Dimensions: 3 5/16” x 2”
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
C790SR Accessories
Set of four 15” skewers. All stainless steel construction.
Unique v-shaped skewers keep food from spinning on shaft.
Part Number: 46074
Material: stainless steel
Weight: 0.4
Dimensions: 18” x 0 5/8”
Polished stainless steel turner with an ergonomic soft grip grey handle and red accents.
Part Number: 43108
Material: stainless steel
Weight: 0.10
Dimensions: 16
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
Porcelain Coated Square Wok Topper.
12” x 12” x 2” porcelain coated grilling wok with stainless steel handles and perforations. The single draw design improves functionality and rigidity, it also makes it much easier to clean.
Part Number: 98121
Material: porcelain steel
Weight: 1.6
$15.19
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
|
Cuisinart grill model C790SR. Some parts not specific to a grill brand or model like regulators, posts,
and heat indicators, which are listed in our repair parts section. Oct 15 2025
|
We ship BBQ grill parts for Cuisinart gas grills worldwide
Back to Cuisinart grill parts
USA shipping (contiguous 48 states only)