Ducane 30731201 (Affinity 3200)

Stainless steel burners. SET OF THREE (3). Fits Ducane Affinity series grill models.

Part Number: 19351-X3
Dimensions: 18” x 1”
Material: stainless steel
Weight: 2.7

Stainless steel burner. Fits Ducane Affinity series grills models.

Part Number: 19351
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.9

Cast iron cooking grids (set of 2). Porcelain enameled, glossy finish.

Part Number: 68502
Dimension Front-to-Back: 18”
Dimension Side-to-Side: 28 3/4”
Material: gloss cast iron
Weight: 14.12

Stainless steel cooking grid for Ducane Affinity grills.

• 304 commercial grade stainless steel
• 1/4” solid stainless rods
• Dimensions: 18” x 11 7/8”
• Made in USA .
• Sold individually.

Unlike the OEM Ducane grids these replace, these high quality made-in-the-USA grids are made of high quality 304 stainless steel that resists rust and corrosion far more than the originals.

Replaces Ducane factory part# 30501011

Part Number: CLA-GS0065
Dimension Front-to-Back: 18”
Dimension Side-to-Side: 11 7/8”
Material: stainless steel
Weight: 4.2

Stainless steel heat distribution plates. SET OF THREE (3). Fits Ducane Affinity 3100 and 3200 series 3-burner grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0044-X3
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 2.4

Stainless steel heat distribution plate for Ducane Affinity grills. Sold individually, number required varies. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0044
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 0.8

Porcelain steel Heat Distribution Plate. Sold individually.

Part Number: 99351
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 6”
Material: porcelain steel
Weight: 1.6

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

Universal four-outlet battery powered push button ignitor.

• 1.5 volt
• Has four (4) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

electrode assembly for use with Weber models with spark generators that have an external grounding prong. Includes mounting tabs to facilitate installation.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04800
Material: ceramic
Weight: 0.2

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

Deluxe 17” stainless steel turner.

• Soft comfort rubber grip
• Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3