Home > Ducane Grill Models > Ducane 30731301Ducane Affinity 3400 3-Burner LP gas grill with side burner and rotisserie burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Ducane grill.
Part diagrams and owners manuals for Ducane model: 30731301 (Affinity 3400)
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts to fit Ducane model: 30731301 (Affinity 3400)
30731301 (Affinity 3400) Burners
Stainless steel burners. SET OF THREE (3). Fits Ducane Affinity series grill models.
Part Number: 19351-X3
Dimensions: 18” x 1”
Material: stainless steel
Weight: 2.7
$84.87
Stainless steel burner. Fits Ducane Affinity series grills models.
Part Number: 19351
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.9
$32.54
30731301 (Affinity 3400) Cooking Grids
Cast iron
cooking grids (set of 2).
Porcelain enameled, glossy finish.
Part Number: 68502
Dimension Front-to-Back: 18”
Dimension Side-to-Side: 28 3/4”
Material: gloss cast iron
Weight: 14.12
$122.31
30731301 (Affinity 3400) Heat Distribution Plates
Stainless steel heat distribution plate for Ducane Affinity grills. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0044
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 0.8
$31.40
Left stainless steel
heat plate for Affinity 3400 and 4400 series grills. Affinity grills equipted with rotisserie burners require two notched
heat plates, a left and a right. This is in addition to one (3-burner models) or two (4-burner models) of the un-notched
heat plate CLA-TS0044. Sold individually. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0044L
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 0.8
$20.37
Right stainless steel
heat plate for Affinity 3400 and 4400 series grills. Affinity grills equipted with rotisserie burners require two notched
heat plates, a left and a right. This is in addition to one (3-burner models) or two (4-burner models) of the un-notched
heat plate CLA-TS0044. Sold individually. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0044R
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 0.8
$20.37
Porcelain steel Heat Distribution Plate. Sold individually.
Part Number: 99351
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 6”
Material: porcelain steel
Weight: 1.6
$30.81
30731301 (Affinity 3400) Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7
$38.00
electrode assembly for use with Weber models with spark generators that have an external grounding prong. Includes mounting tabs to facilitate installation.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04800
Material: ceramic
Weight: 0.2
$11.77
30731301 (Affinity 3400) Accessories
10” Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73