Ducane 7200

Right-side stainless steel burner kit. Includes 165L1 right-side burner, 03758 electrode, wire, and collector box.
NOTE: For models 7200 and 7200R, the burners are reversed such that this is the right-side burner for those models.

Part Number: 16511
Dimensions: 18 1/4” x 8 7/8”
Material: stainless steel
Weight: 1.7

Left-side stainless steel burner kit. Includes 165R1 left-side burner, 03758 electrode, wire, and collector box.
NOTE: For models 7200 and 7200R, the burners are reversed such that this is the left-side burner for those models.

Part Number: 16521
Dimensions: 18 1/4” x 8 7/8”
Material: stainless steel
Weight: 1.7

Left-side stainless steel burner.
NOTE: For models 7200 and 7200R, the burners are reversed such that this is the left-side burner for those models.

Replaces Ducane factory part# 31200015

Part Number: 165R1
Dimensions: 18 1/4” x 8 7/8”
Material: stainless steel
Weight: 1.14

Right-side stainless steel burner.
NOTE: For models 7200 and 7200R, the burners are reversed such that this is the right-side burner for those models.

Replaces Ducane factory part# 31200016

Part Number: 165L1
Dimensions: 18 1/4” x 8 7/8”
Material: stainless steel
Weight: 1.15

U burner support bracket. Replaces OEM# 20175501. Sold indivually. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0057
Material: stainless steel
Weight: 0.05

C burner support bracket. Replaces OEM# G4162359. Sold indivually. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0058
Material: stainless steel
Weight: 0.05

Stainless steel Sear Grid set. Replaces Ducane OEM part 20172305.

The stainless steel SEAR GRID is a 2-piece die formed part with domed runners. Each runner traps and collects the heat of the briquettes thus making your grill 30% more effective than other cooking grids. The trapped heat within each runner produces wide sear marks on the meat, thus sealing in the meat’s juices.

The SEAR GRID is made of a high quality stainless steel. Due to the heat of cooking, a discoloration of the SEAR GRID is normal and will not affect the SEAR GRID in any manner.

Part Number: 565S2
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 24 1/2”
Material: stamped stainless steel
Weight: 6.0

20172205 Ducane Pyromid® briquettes. Bag of 90 high quality pyromid-shaped, flat-top ceramic pieces. These are the same OEM factory briquettes that came with your new Ducane grill

Fits Ducane 1605 and 7200 series grills, and all models using La-Va-Grate part# 20172508.

Part Number: 20172205
Dimensions: 2” x 2”
Material: ceramic
Weight: 12.8

20172508-R LA-VA-GRATE. Stainless steel rack for supporting lava rock.

Fits 1600, 1605, and 7200 series grill heads by Ducane.

• Replaces original OEM part# 20172508
• Commercial grade stainless steel

All Ducane grills are equipped with a patented, high temp stainless steel Lava Grate. This grate-like device is installed above the burner(s) and supports the briquettes. The Lava Grate is constructed of two layers of offset “V”-shaped runners. When properly installed, the bottom of the “V”-shaped runners must point toward the burner.

Part Number: 20172508-R
Dimensions: 18 3/16” x 24 5/16”
Material: stainless steel
Weight: 6.9

20172508-KIT LA-VA-GRATE and Pyromid® Briquettes.

Kit includes:
• 20172508-R Stainless steel Lava Grate for supporting ceramic briquettes and lava rock.

  Fits 1605 and 7200 series grills by Ducane.

• 20172205 Ducane Pyromid® briquettes. Bag of 90 high quality pyromid-shaped, flat-top ceramic pieces. These are the same OEM factory briquettes that came with your new Ducane grill

Part Number: 20172508-KIT
Dimensions: 18 3/16” x 24 5/16”
Material: stainless steel
Weight: 19.7

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03400
Weight: 0.1

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Battery powered push button igniter.

• Has two (2) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Ducane factory part# 30000045

Part Number: IGEIB2-B
Weight: 0.3

Collector box, ceramic electrode, glow wire spring, and 23” wire with female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Ducane factory part# 31200013

Part Number: 03758
Material: ceramic
Weight: 0.2

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts 94751, 92571 and other simular trays.

Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7