Home > Fiesta Grill Models > Fiesta BP26040-BL423
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Fiesta grill. This is best done with the old parts out of the grill. Verify your Fiesta grill model number.
Replacement grill parts to fit Fiesta model: BP26040-BL423
BP26040-BL423 Burners
Genuine OEM Fiesta stainless steel burner and venturi assembly. Fits 260 series grills. Includes:
- Stainless oval burner
- Twin venturi with integrated spider guards.
Part Number: SP91-12
Dimensions: 2 3/8” x 13”
Material: stainless steel
Weight: 0.90
$19.87
BP26040-BL423 Venturis
Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.
Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1
$12.82
BP26040-BL423 Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 56041
Dimension Front-to-Back: 12 1/2”
Dimension Side-to-Side: 19 5/8”
Material: porcelain steel wire
Weight: 3.5
$40.54
BP26040-BL423 Igniter Components
Push-Button self-grounding
piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. Secondary connector is a flat male
spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part#
03620. For more information, see our article
Ignition 101.
Part Number: 03120
Weight: 0.1
$9.77
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
$10.35
Snap In
Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: UP-9B
Weight: 0.2
$8.38
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
$3.84
BP26040-BL423 Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57