Home > Frontgate Grill Models > Frontgate FG27F
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Frontgate grill.
Replacement grill parts for Frontgate model: FG27F
FG27F Burners
Burner air shutter. Made in USA

.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-MS0060
Material: stainless steel
Weight: 0.05
Stainless steel smoker burner. Fits all DCS grill models originally outfitted with a smoker.
Part Number: 12181
Material: stainless steel
Weight: 0.7
Dimensions: 18 x 1
Cast iron burner; includes air shutter for Frontgate model FG27F.
Part Number: 22701
Material: cast iron
Weight: 10.9
Dimensions: 16 x 6 1/4
U shaped center fed premium commercial grade stainless steel burner for many DCS model grills for Frontgate model FG27F.
Part Number: DCSU1
Material: stainless steel
Weight: 2.0
Dimensions: 19 3/8 x 6
FG27F Cooking Grids
Premium quality stainless steel
cooking grids. SET OF TWO (2).
- Made in USA

- 304 commercial grade stainless steel
- 5/16 diameter solid stainless rods
- Each panel measures 19 1/2 x 12 3/4
- Overall dimensions: 19 1/2 x 25 1/2
.
Part Number: CG-80SS-X2
Material: stainless steel
Weight: 14.6
Dimensions:
- Front-To-Back: 19 1/2″
- Side-To_Side: 25 1/2″
Premium quality heavy duty stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.
Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 7pounds of solid stainless each.
- 304 commercial grade stainless steel
- Large diameter 5/16 solid stainless rods
- Dimensions: 19 1/2 x 12 3/4
- Made in USA
. - Sold individually.
Part Number: CLA-GS0164
Material: stainless steel
Weight: 7.3
Dimensions:
- Front-To-Back: 19 1/2″
- Side-To_Side: 12 3/4″
FG27F Heat Distribution Plates
Stainless steel Heat Distribution Plate / Flame Tamer. Made in USA

. The pull rod, used to lift the part from the grill, is replaced with a pull hole.
NOTE: Can also be used as a replacement for ceramic radients. This part replaces the radients and the rack that holds them.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use
Part Number: CLA-TS0160
Material: stainless steel
Weight: 1.8
Dimensions:
- Front-To-Back: 18 11/16″
- Side-To_Side: 10″
$49.95
$39.90
FG27F Igniter Components
Rotary
piezo spark generator with single
round connector outlet.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03200
Weight: 0.2
Igniter electrode kit.
Sold individually. Fits both left and right hand side.
Includes:- Collector box (replaces OEM part 32801 and 32210-01)
- Electrode with ceramic insulator and 30 wire (replaces OEM parts 16281, 16281-02, and 16281-03)
- Small sex change wire with female spade connector and male round connector. Required for some grills that use a female spade connection to the ignitor.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04850
Material: ceramic
Weight: 0.2
FG27F Accessories
GrillPro Texas hickory BBQ wood chips. 800g. For use in all BBQ Grill and smoker applications.
Part Number: 00220
Weight: 2.0
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Material: stainless steel
Weight: 0.5
Dimensions: 8 1/4
Marinade Injector.For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.
Part Number: 14950
Material: stailess steel
Weight: 0.5
Porcelain Coated Square Wok Topper.
12 x 12 x 2 porcelain coated grilling wok with stainless steel handles and perforations. The single draw design improves functionality and rigidity, it also makes it much easier to clean.
Part Number: 98121
Material: porcelain steel
Weight: 1.6
Dimensions: 12 x 12
GrillPro EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
This tank gauge will monitor your propane level, while you grill, and let's you know when you're running low on gas.
The magnetic tank gauge offers fast, accurate propane level monitoring for any size LP tank. The magnetic backing makes it easy to attach, remove, and reuse across multiple tanksperfect for grilling, camping, patio heaters, and more
Made in USA
Part Number: 00030
Weight: 0.1
|
Frontgate FG27F - 02-Nov-26
|
We ship Frontgate BBQ parts worldwide
Back to Frontgate grill parts