Parts for GE ZGG27L21ASS

GE Monogram® 27" Outdoor Cooking Center with 2 Grill Burnersm Rotisserie and Rack

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your GE grill.

Part diagrams and owners manuals for GE model: ZGG27L21ASS

Click small image to enlarge. Click Large image to reduce.
Double click for new window

Exploded parts diagram for model: ZGG27L21ASS

Replacement grill parts for GE model: ZGG27L21ASS

ZGG27L21ASS Burners

WB28X10025-R-X2 Cast iron ”H” burners. Set of two (2). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10025 . Meets or exceeds all manufacturer specifications.

Replaces GE factory part# WB28X10025-X2

Part Number: WB28X10025-R-X2
Dimensions: 16” x 6 1/4”
Material: cast iron
Weight: 20.6

cast iron burner for GE model ZGG27L21ASS

$202.40

$149.99

WB28X10025-R Cast iron ”H” burner with integrated center-fed cast iron venturi. Aftermarket replacement for original burner part# WB28X10025 . Meets or exceeds all manufacturer specifications.

Replaces GE factory part# WB28X10025

Part Number: WB28X10025-R
Dimensions: 16” x 6 1/4”
Material: cast iron
Weight: 10.3

$94.78

All GE Burners

ZGG27L21ASS Grill Racks

Premium quality heavy duty stainless steel grill rack. WB49X10019-SS is an aftermarket part that replaces GE original part WB49X10019.

Our USA-made premium stainless grids are simply the best obtainable.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or sleeved carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it. Just look at the weight of one of these grids, over 7pounds of solid stainless each.

304 commercial grade stainless steel
Large diameter 5/16” solid stainless rods
Dimensions: 19 1/2” x 12 3/4”
Made in USA .
Sold individually.

Part Number: WB49X10019-SS
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 7.3

$84.65

All GE Grill Racks

ZGG27L21ASS Lava Rock Support

Stainless steel heat plate/lava rock support. Made in USA

.

NOTE: This part does not match the original exactly but is a fully functional replacement.

NOTE: Sometimes shipped with peel-off vinyl coating. Remove before use.
Replaces GE factory part# WB02X10434

Part Number: WB02X10434-R
Material: stainless steel
Weight: 2.3

$59.46

Qty

All GE Lava Rock Support

ZGG27L21ASS Igniter Components

Rotary piezo spark generator. Two round connector leads send spark to both main burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB03X10016

Part Number: 03220
Weight: 0.2

$17.41

Qty

Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10659 .
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB02X10659

Part Number: WB02X10659-R
Weight: 0.2

$13.25

Qty

Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10660 .
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB02X10660

Part Number: WB02X10660-R
Weight: 0.2

$13.25

Qty

   All GE Igniter Components

ZGG27L21ASS Valves, Orifices, and Manifolds

Brass valve for DCS.
For LP and natural gas grills (see below)
Off position D-Value: 12 o'clock
Stem diameter: 8mm
Orifice not included
NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.
Replaces GE factory part# WB21X10013

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

$28.50

Qty

   All GE Valves, Orifices, and Manifolds

ZGG27L21ASS Rotisserie components

Plastic spit rod handle with brass insert.
Requires bushing BU-1 (5/16” square spit rods) or BU-2 (3/8” square spit rods)
Will fit our spit rods: SR-5; SR-8; SR-43
Requires a threaded end on the spit rod
The mounting hole in the handle is 3/8-16 coarse thread female
Replaces GE factory part# WB15X10005

Part Number: PH-1
Weight: 0.2

$6.70

Qty

   All GE Rotisserie components

ZGG27L21ASS Accessories

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

$6.64

Qty

Durable 2 5/16” round briquettes
Self-cleaning
Control flare-ups while holding an even heat pattern.
About 53 pieces, covers approximately 275 sq. inches.
Fits all gas grills

Part Number: BQ-5
Weight: 7.2

$31.19

Qty

Deluxe 17” stainless steel turner.
Soft comfort rubber grip
Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

$9.48

Qty

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

$8.76

Qty

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

  $27.83

Qty

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3

$6.73

Qty

   All Accessories