GE ZGG27L21C2SS

WB28X10025-R-X2 Cast iron ”H” burners. Set of two (2). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10025 . Meets or exceeds all manufacturer specifications.

Replaces GE factory part# WB28X10025-X2

Part Number: WB28X10025-R-X2
Dimensions: 16” x 6 1/4”
Material: cast iron
Weight: 20.6

WB28X10025-R Cast iron ”H” burner with integrated center-fed cast iron venturi. Aftermarket replacement for original burner part# WB28X10025 . Meets or exceeds all manufacturer specifications.

Replaces GE factory part# WB28X10025

Part Number: WB28X10025-R
Dimensions: 16” x 6 1/4”
Material: cast iron
Weight: 10.3

Premium quality heavy duty stainless steel grill rack. WB49X10019-SS is an aftermarket part that replaces GE original part WB49X10019.

Our USA-made premium stainless grids are simply the best obtainable.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or sleeved carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it. Just look at the weight of one of these grids, over 7pounds of solid stainless each.

• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Dimensions: 19 1/2” x 12 3/4”
• Made in USA .
• Sold individually.

Part Number: WB49X10019-SS
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 7.3

Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10659 .

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces GE factory part# WB02X10659

Part Number: WB02X10659-R
Weight: 0.2

Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10660 .

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces GE factory part# WB02X10660

Part Number: WB02X10660-R
Weight: 0.2

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces GE factory part# WB21X10013

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Plastic spit rod handle with brass insert.

• Requires bushing BU-1 (5/16” square spit rods) or BU-2 (3/8” square spit rods)
• Will fit our spit rods: SR-5; SR-8; SR-43
• Requires a threaded end on the spit rod
• The mounting hole in the handle is 3/8-16 coarse thread female

Replaces GE factory part# WB15X10005

Part Number: PH-1
Weight: 0.2

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.5