Home > GE Grill Models > GE ZGG27L21CSSGE Monogramฎ 27" Outdoor Cooking Center with 2 Grill Burners, Rotisserie and Rack
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your GE grill.
Part diagrams and owners manuals for GE model: ZGG27L21CSS
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement BBQ grill parts for GE model: ZGG27L21CSS
ZGG27L21CSS Burners
WB28X10025-R-X2 Cast iron H burners. Set of two (2). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10025 . Meets or exceeds all manufacturer specifications.
Replaces GE factory part# WB28X10025-X2
Part Number: WB28X10025-R-X2
Dimensions: 16 x 6 1/4
Material: cast iron
Weight: 20.6
$202.40 $149.99
WB28X10025-R Cast iron H burner with integrated center-fed cast iron venturi. Aftermarket replacement for original burner part# WB28X10025 . Meets or exceeds all manufacturer specifications.
Replaces GE factory part# WB28X10025
Part Number: WB28X10025-R
Dimensions: 16 x 6 1/4
Material: cast iron
Weight: 10.3
$94.78
ZGG27L21CSS Grill Racks
Premium quality heavy duty stainless steel grill rack. WB49X10019-SS is an aftermarket part that replaces GE original part WB49X10019.
Our USA-made premium stainless grids are simply the best obtainable.
Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or sleeved carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it. Just look at the weight of one of these grids, over 7pounds of solid stainless each.
- 304 commercial grade stainless steel
- Large diameter 5/16 solid stainless rods
- Dimensions: 19 1/2 x 12 3/4
- Made in USA .
- Sold individually.
Part Number: WB49X10019-SS
Dimension Front-to-Back: 19 1/2
Dimension Side-to-Side: 12 3/4
Material: stainless steel
Weight: 7.3
$84.65
ZGG27L21CSS Igniter Components
Rotary
piezo spark generator. Two
round connector leads send spark to both main burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB03X10016
Part Number: 03220
Weight: 0.2
$17.41
Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10659 .
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB02X10659
Part Number: WB02X10659-R
Weight: 0.2
$13.25
Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10660 .
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB02X10660
Part Number: WB02X10660-R
Weight: 0.2
$13.25
ZGG27L21CSS Valves, Orifices, and Manifolds
Brass valve for DCS.
- For LP and natural gas grills (see below)
- Off position D-Value: 12 o'clock
- Stem diameter: 8mm
- Orifice not included
NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.
Replaces GE factory part# WB21X10013
Part Number: 30171
Dimensions: 3 7/16 x 1 5/16
Material: brass
Weight: 0.3
$28.50
ZGG27L21CSS Rotisserie components
Plastic spit rod handle with brass insert.
- Requires bushing BU-1 (5/16 square spit rods) or BU-2 (3/8 square spit rods)
- Will fit our spit rods: SR-5; SR-8; SR-43
- Requires a threaded end on the spit rod
- The mounting hole in the handle is 3/8-16 coarse thread female
Replaces GE factory part# WB15X10005
Part Number: PH-1
Weight: 0.2
$6.70
ZGG27L21CSS Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4 x 8 3/8
Material: cast iron
Weight: 3.90
$25.40
15 Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick flat spit basket. Attaches to 3/8 rotisserie rod with adjustable lid to secure food. 16x7.5x2
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2 x 16
Weight: 1.5
$22.60
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8 x 3 1/2
Weight: 0.7
$25.57