Home > GE Grill Models > GE ZGG27L21YSS
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your GE grill.
Part diagrams and owners manuals for GE model: ZGG27L21YSS
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts to fit GE model: ZGG27L21YSS
ZGG27L21YSS Burners
WB28X10025-R-X2 Cast iron ”H” burners. Set of two (2). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10025 . Meets or exceeds all manufacturer specifications.
Replaces GE factory part# WB28X10025-X2
Part Number: WB28X10025-R-X2
Dimensions: 16” x 6 1/4”
Material: cast iron
Weight: 20.6
$202.40 $149.99
WB28X10025-R Cast iron ”H” burner with integrated center-fed cast iron venturi. Aftermarket replacement for original burner part# WB28X10025 . Meets or exceeds all manufacturer specifications.
Replaces GE factory part# WB28X10025
Part Number: WB28X10025-R
Dimensions: 16” x 6 1/4”
Material: cast iron
Weight: 10.3
$94.78
ZGG27L21YSS Grill Racks
Premium quality heavy duty stainless steel grill rack. WB49X10019-SS is an aftermarket part that replaces GE original part WB49X10019.
Our USA-made premium stainless grids are simply the best obtainable.
Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or sleeved carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it. Just look at the weight of one of these grids, over 7pounds of solid stainless each.
- 304 commercial grade stainless steel
- Large diameter 5/16” solid stainless rods
- Dimensions: 19 1/2” x 12 3/4”
- Made in USA .
- Sold individually.
Part Number: WB49X10019-SS
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 7.3
$84.65
ZGG27L21YSS Lava Rock Support
Stainless steel
heat plate/lava rock support. Made in USA
.
NOTE: This part does not match the original exactly but is a fully functional replacement.
NOTE: >Sometimes shipped with peel-off vinyl coating. Remove before use.Replaces GE factory part# WB02X10434
Part Number: WB02X10434-R
Material: stainless steel
Weight: 2.3
$59.46
ZGG27L21YSS Igniter Components
Rotary
piezo spark generator. Two
round connector leads send spark to both main burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB03X10016
Part Number: 03220
Weight: 0.2
$17.41
Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10659 .
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB02X10659
Part Number: WB02X10659-R
Weight: 0.2
$13.25
Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10660 .
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces GE factory part# WB02X10660
Part Number: WB02X10660-R
Weight: 0.2
$13.25
ZGG27L21YSS Valves, Orifices, and Manifolds
Brass valve for DCS.
- For LP and natural gas grills (see below)
- Off position D-Value: 12 o'clock
- Stem diameter: 8mm
- Orifice not included
NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.
Replaces GE factory part# WB21X10013
Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3
$28.50
ZGG27L21YSS Rotisserie components
Plastic spit rod handle with brass insert.
- Requires bushing BU-1 (5/16” square spit rods) or BU-2 (3/8” square spit rods)
- Will fit our spit rods: SR-5; SR-8; SR-43
- Requires a threaded end on the spit rod
- The mounting hole in the handle is 3/8-16 coarse thread female
Replaces GE factory part# WB15X10005
Part Number: PH-1
Weight: 0.2
$6.70
ZGG27L21YSS Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
Ceramic briquettes for Lynx and Dynasty Grills with 28 briquettes per box.
Part Number: BQLYX
Dimensions: 2” x 2”
Material: ceramic
Weight: 4.0
$40.54
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96